Pricemate

Grundfos magna3 32-80 cirkulating pump 180 mm - Pumput - 97924256

The premium choice when system control and monitoring is key. The MAGNA3 supports fieldbus by optional CIM modules and has a TFT display for intuitive configuration of the intelligent features.Applications:HeatingAir-conditioningPump designs:Canned RotorTechnical data:Head max: 18.88 mLiquid temperature: -10 .. 110 °CMax flow: 76.6 m3/hp max: 16 bar

EUR 1203.92

1

Grundfos circulator alpha3 25-80 180 mm - Pumput - 99371961

ALPHA3 - easy hydronic balancingThe ALPHA3 is our newest circulator for domestic buildings. It is of the renowned Grundfos quality and guarantees easy installation, world-class energy efficiency and reliable operation in the toughest conditions. For the ultimate benefits of the ALPHA3, however, installers need two other components - the ALPHA Reader and the Grundfos GO Balance app. Together, the state-of-the-art ALPHA3 system helps installers complete a hydronic balancing incredibly fast and accurately.ALPHA READERThe ALPHA Reader is a pocket-sized device that you attach to the front of the ALPHA3. It reads a light signal from the pump and communicates with the Grundfos GO Balance app via Bluetooth during the balancing process. Once the hydronic balancing is done, installers can simply take the ALPHA Reader with them to their next job.GRUNDFOS GO BALANCE APPThe Grundfos Go Balance app is downloaded from iTunes or Google Play. The app picks up the Bluetooth signal from the ALPHA Reader and guides installers through four simple balancing steps.FAST AND EASY BALANCINGWith the ALPHA3, the ALPHA Reader and the Grundfos GO Balance app, installers are set for fast and easy system balancing - without compromising on reliability, efficiency and easy installation.Hydronic Balancing with ALPHA3 and ALPHA reader works with: Two pipe radiator systemsThe GRUNDFOS ALPHA3 is suitable for running in: Systems with constant or varying flow One pipe systems Two pipe systems Domestic hot-water recirculation Underfloor heating systems Systems where night setback is required.Features and benefits Hydronic Balancing No blockage Best in class efficiencyBenefits of hydronic Balancing: Savings on heating bill between 7-20 %* Lower return temperature in the system Lower noise in the heating system

EUR 868.23

1

Grundfos circulator alpha3 15-60 130 mm - Pumput - 99371950

ALPHA3 - easy hydronic balancingThe ALPHA3 is our newest circulator for domestic buildings. It is of the renowned Grundfos quality and guarantees easy installation, world-class energy efficiency and reliable operation in the toughest conditions. For the ultimate benefits of the ALPHA3, however, installers need two other components - the ALPHA Reader and the Grundfos GO Balance app. Together, the state-of-the-art ALPHA3 system helps installers complete a hydronic balancing incredibly fast and accurately.ALPHA READERThe ALPHA Reader is a pocket-sized device that you attach to the front of the ALPHA3. It reads a light signal from the pump and communicates with the Grundfos GO Balance app via Bluetooth during the balancing process. Once the hydronic balancing is done, installers can simply take the ALPHA Reader with them to their next job.GRUNDFOS GO BALANCE APPThe Grundfos Go Balance app is downloaded from iTunes or Google Play. The app picks up the Bluetooth signal from the ALPHA Reader and guides installers through four simple balancing steps.FAST AND EASY BALANCINGWith the ALPHA3, the ALPHA Reader and the Grundfos GO Balance app, installers are set for fast and easy system balancing - without compromising on reliability, efficiency and easy installation.Hydronic Balancing with ALPHA3 and ALPHA reader works with: Two pipe radiator systemsThe GRUNDFOS ALPHA3 is suitable for running in: Systems with constant or varying flow One pipe systems Two pipe systems Domestic hot-water recirculation Underfloor heating systems Systems where night setback is required.Features and benefits Hydronic Balancing No blockage Best in class efficiencyBenefits of hydronic Balancing: Savings on heating bill between 7-20 %* Lower return temperature in the system Lower noise in the heating system

EUR 574.41

1

Grundfos circulator alpha3 25-60 180 mm - Pumput - 99371959

ALPHA3 - easy hydronic balancingThe ALPHA3 is our newest circulator for domestic buildings. It is of the renowned Grundfos quality and guarantees easy installation, world-class energy efficiency and reliable operation in the toughest conditions. For the ultimate benefits of the ALPHA3, however, installers need two other components - the ALPHA Reader and the Grundfos GO Balance app. Together, the state-of-the-art ALPHA3 system helps installers complete a hydronic balancing incredibly fast and accurately.ALPHA READERThe ALPHA Reader is a pocket-sized device that you attach to the front of the ALPHA3. It reads a light signal from the pump and communicates with the Grundfos GO Balance app via Bluetooth during the balancing process. Once the hydronic balancing is done, installers can simply take the ALPHA Reader with them to their next job.GRUNDFOS GO BALANCE APPThe Grundfos Go Balance app is downloaded from iTunes or Google Play. The app picks up the Bluetooth signal from the ALPHA Reader and guides installers through four simple balancing steps.FAST AND EASY BALANCINGWith the ALPHA3, the ALPHA Reader and the Grundfos GO Balance app, installers are set for fast and easy system balancing - without compromising on reliability, efficiency and easy installation.Hydronic Balancing with ALPHA3 and ALPHA reader works with: Two pipe radiator systemsThe GRUNDFOS ALPHA3 is suitable for running in: Systems with constant or varying flow One pipe systems Two pipe systems Domestic hot-water recirculation Underfloor heating systems Systems where night setback is required.Features and benefits Hydronic Balancing No blockage Best in class efficiencyBenefits of hydronic Balancing: Savings on heating bill between 7-20 %* Lower return temperature in the system Lower noise in the heating system

EUR 512.77

1

Grundfos Sololift2 WC-1 - Pumput - 97775314

Th different diameters- Non-return valve- Alarm system for high water level in the tank- Removable lid for easy access to the tank and pump for cleaning and maintenance purposes.SOLOLIFT2 WC-1 on pieni, kompakti automaattinen nostoasema, joka soveltuu jäteveden pumppaamiseen yksityisasunnoissa paikoista, joissa jätevettä ei voida johtaa suoraan viemäriin luonnollisen kaltevuuden avulla. SOLOLIFT2 WC-1 sopii jäteveden pumppaamiseen wc:stä, jossa on wc-paperia ja ulostetta sekä lisäliitäntöjä esimerkiksi pesualtaalle. Muiden materiaalien sisältämien nesteiden pumppaus voi aiheuttaa vikoja ja rajoittaa takuumme kattavuutta.SOLOLIFT2 WC-1:a käytetään tyypillisesti seuraaviin tarkoituksiin:- Wc:n ja pesualtaan kuivatus kellareissa viemärilinjan alapuolella saneeraus tai modernisointiprojekteissa olemassa olevissa rakennuksissa, joissa sijainti voi olla kaukana päärunkoputkesta niin että luonnollista kaltevuutta ei voida muodostaa.Kompaktilla nostoasemalla on varustettuna:- Kaapeli pistokkeella tai ilman (katso tekniset tiedot)- Vaakasuora tai pystysuora kiinnitysmahdollisuus poistoletkuliittimelle useilla sovittimilla eri halkaisijoille- Takaiskuventtiili- Hälytysjärjestelmä korkeasta vedentasosta säiliössä- Irrotettava kansi helppoa pääsyä varten säiliöön ja pumppuun, jotta niitä voidaan puhdistaa ja huoltaa.

EUR 623.01

1

Grundfos unilift ap 50b 50.11.3 v 3x400v 5m no plug - Pumput - 96004601

Unilift AP50B.50.11.3.VSubmersible effluent pumpVertical single-stage stainless steel submersiblepump with integrated submersible 3-phasemotor. The pump is fitted with ring stand and carryinghandle and is supplied with a 5 m mainscable. The impeller is a VORTEX impeller for50 mm free passage suitable for pumpingsurface water, groundwater, wastewater andsimilar.The pump has a double shaft seal and anintermediate oil chamber pre-filled with non-toxicspecial oil. The motor is insulation class F and has long-life deep-groove greased-for-life ball bearings.The pump has R 2' discharge port and is readyfor installation either free-standing or on anauto-coupling system. Liquid:Maximum liquid temperature:40 °CTechnical:Type of impeller:VORTEXMaximum particle size:50 mmMaterials:Pump housing:Stainless steelPump housing:DIN W.-Nr. 1.4301Pump housing:AISI 304Impeller:Stainless steelImpeller:DIN W.-Nr. 1.4301Impeller:AISI 304Installation:Pump outlet:R 2'Maximum installation depth:7 mElectrical data:Power input - P1:1.75 kWRated voltage:3 x 400 VRated current:2.81 ACos phi - power factor:0,90Rated speed:2785 rpmEnclosure class (IEC 34-5):IP68Insulation class (IEC 85):FLength of cable:5 mType of cable plug:NONEOthers:Net weight:10.6 kg

EUR 1537.94

1

Grundfos conlift1 - Kattilat ja savupiiput - 97936156

CONLIFT1Conlift1ApplicationsThe Conlift1 is suitable for the pumping of condensatewhich is collected below sewer level or which cannotflow to the sewage system or drain of the building bymeans of a natural downward slope.Typical applications: Condensate boilers. A 200 kW boiler can be drainedup to 5 m duty point. For condensate with a pH value above 2.5. For condensate from air-conditioning systems,cooling and refrigeration systems, air dehumidifiersand evaporators. For condensate with a pH value below 2.5, useConlift2 pH+.Features Fully sealed against moisture and evaporation. Quick and easy installation. Very silent and smooth operation. Can be mounted on the floor or on a wall. Pre-assembled non-return valve. Pump operation test button. Incorporates high-water float switch. Fully automatic operation. Inlet and discharge hose connectors included.Liquid:Maximum liquid temperature:50° °CTechnical:Curve tolerance:ISO 9906:2012 Grade 3BInstallation:Pump inlet:18-30Pump outlet:8-10Electrical data:Power input - P1:75 WRated voltage:1 x 230 VRated current:0.65 AEnclosure class (IEC 34-5):IP24Insulation class (IEC 85):FLength of cable:1.7 mType of cable plug:SCHUKOTank:Total volume of tank(s):2.65 lOthers:Net weight:4.1 kg

EUR 214.84

1

Grundfos comfort 15-14 bxa pm 140 mm - Pumput - 97916749

COMFORT 15-14 BXA PM 140 mmThe high efficiency Coomfort PM range is a product for domestic hotwater recirculation in 1 and 2 family houses.The motor is a single-phase, 2-pole, hysteresis, permanent-magnet motor in conformity with the EMC directive.Characteristics and benefits:* Unique AUTOADAPT saves up to 50% heatenergy and 87% motor energy compared with a standard pump in continuous operation* Flushing function* Automatic legionella operation (if supported from the system)* Automatic weekend and vacation function* Temperature control optional* Continuous operation optional* Fast and simple electrical installation due to the million times trusted ALPHA plug* Easy to clean and lime insensitive spheric rotor* Application area up 14°dH water hardness* Wearless operation due to liquid lubricated bearing* No leakage risk due to a static seal* Easy maintenance and cleaning by easy-to-separated motor head that fits on all standard circulation pump housings* Korrosion resistant pump housing in brass* Due to impedance protected motor no motor protection necessary* No additional installation costs due to integrated non return and stop valve in the pump housingLiquid:Liquid temperature range:2 .. 95 °CTechnical:TF class:95Approvals on nameplate:VDE,GS,CEMaterials:Pump housing:Brass MS 68Impeller:Stainless steel, EPDM, PPO, PTFE, GraphitInstallation:Maximum operating pressure:10 barPipe connection:G 1 1/4Port-to-port length:110 mmElectrical data:Max. power input:8 WRated voltage:1 x 230 VCurrent in speed 3:0.07 ACapacitor size - run:0.6 FEnclosure class (IEC 34-5):IP44Insulation class (IEC 85):FOthers:Net weight:1.35 kgGross weight:1.51 kgShipping volume:0.003 m3

EUR 717.35

1

Grundfos cr3-4 a-a-a-e-hqqe 3x230/400 50hz - Pumput - 96516592

CR 3-4 A-A-A-E-HQQEVertical, multistage centrifugal pump with suction and discharge ports on same the level (in-line) enabling installation in a horizontal one-pipe system. The pump head and base are in cast iron - all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling and easy service and access. Power transmission is via a split coupling. Pipework connection is via oval flanges with internal Rp threads.The pump is fitted with a 3-phase, fan-cooled asynchronous motor.{br}Liquid:Liquid temperature range:-20 .. 120 °CTechnical:Speed for pump data:2873 rpmRated flow:3 m3/hRated head:19.1 mShaft seal:HQQEApprovals on nameplate:CE,TRCurve tolerance:ISO 9906:1999 Annex AMaterials:Pump housing:Cast ironPump housing:EN-JL1030Pump housing:ASTM A48-30 BImpeller:Stainless steelImpeller:DIN W.-Nr. 1.4301Impeller:AISI 304Installation:Maximum ambient temperature:40 °CMax pressure at stated temp:16 bar / 120 °CMax pressure at stated temp:16 bar / -20 °CFlange standard:OVALPipe connection:Rp 1Flange size for motor:FT85Electrical data:Motor type:71AIE Efficiency class:NANumber of poles:2Rated power - P2:0.37 kWPower (P2) required by pump:0.37 kWPower (P2) required by pump:0.37 kWRated voltage:3 x 220-240 D/380-415 Y VRated current:1,74/1,00 AStarting current:490-530 %Cos phi - power factor:0,80-0,70Rated speed:2850-2880 rpmEfficiency:78,5%Motor efficiency at full load:78,5 %Motor efficiency at 3/4 load:79,0-76,5 %Motor efficiency at 1/2 load:75,5-71,5 %Enclosure class (IEC 34-5):55 (Protect. water jets/dust)Insulation class (IEC 85):FOthers:Minimum efficiency index, MEI =:0.7Net weight:18.7 kgGross weight:21.4 kgShipping volume:0.05 m3

EUR 1260.17

1

Grundfos magna3 32-120 f 220 1x230v pn6/10 - Pumput - 97924259

MAGNA3 32-120 FMAGNA3 - More than a pumpWith its unrivalled efficiency, all-encompassing range and built-in communication capabilities plus functionalities replacing system components, the MAGNA3 is ideal for engineers and specifiers looking to create high-performance systems for buildings. This pump in the Grundfos Master Class will fit both heating and cooling applications perfectly, making it the obvious choice for almost any building project - old or new.The MAGNA3 is of the canned-rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid.The innovative clamp with only one screw enables easy repositioning of the pump head. The MAGNA3 is a pump with no maintenance requirements and with extremely low Life Cycle Cost.The pump is characterised by the following: controller integrated in the control box control panel with TFT display on the control box control box prepared for optional CIM modules built-in differential-pressure and temperature sensor cast-iron pump housing (depending on model) carbon-fibre-reinforced composite rotor can stainless-steel bearing plate and rotor cladding aluminium alloy stator housing air-cooled power electronicsThe MAGNA3 is a single-phase pump.Characteristic features AUTOADAPT. FLOWADAPT and FLOWLIMIT (more than a pump function as it reduces the need for pump throttling valves). Proportional-pressure control. Constant-pressure control. Constant-temperature control. Constant-curve duty. Max. or min. curve duty. Automatic Night Setback. No external motor protection required. Insulating shells supplied with single-head pumps for heating systems. Large temperature range where the liquid temperature and the ambient temperature are independent of each other.CommunicationThe MAGNA3 enables communication via the following: wireless Grundfos GO Remot

EUR 1991.93

1

Grundfos magna3 25-80 cirkulating pump 180 mm - Pumput - 97924246

MAGNA3 40-100 FMAGNA3 - More than a pumpWith its unrivalled efficiency, all-encompassing range and built-in communication capabilities plus functionalities replacing system components, the MAGNA3 is ideal for engineers and specifiers looking to create high-performance systems for buildings. This pump in the Grundfos Master Class will fit both heating and cooling applications perfectly, making it the obvious choice for almost any building project - old or new.The MAGNA3 is of the canned-rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid.The innovative clamp with only one screw enables easy repositioning of the pump head. The MAGNA3 is a pump with no maintenance requirements and with extremely low Life Cycle Cost.The pump is characterised by the following: controller integrated in the control box control panel with TFT display on the control box control box prepared for optional CIM modules built-in differential-pressure and temperature sensor cast-iron pump housing (depending on model) carbon-fibre-reinforced composite rotor can stainless-steel bearing plate and rotor cladding aluminium alloy stator housing air-cooled power electronicsThe MAGNA3 is a single-phase pump.Characteristic features AUTOADAPT. FLOWADAPT and FLOWLIMIT (more than a pump function as it reduces the need for pump throttling valves). Proportional-pressure control. Constant-pressure control. Constant-temperature control. Constant-curve duty. Max. or min. curve duty. Automatic Night Setback. No external motor protection required. Insulating shells supplied with single-head pumps for heating systems. Large temperature range where the liquid temperature and the ambient temperature are independent of each other.CommunicationThe MAGNA3 enables communication via the following: wireless Grundfos GO Remot

EUR 902.65

1

Grundfos magna3 32-100 cirkulating pump 180 mm - Pumput - 97924257

MAGNA3 40-100 FMAGNA3 - More than a pumpWith its unrivalled efficiency, all-encompassing range and built-in communication capabilities plus functionalities replacing system components, the MAGNA3 is ideal for engineers and specifiers looking to create high-performance systems for buildings. This pump in the Grundfos Master Class will fit both heating and cooling applications perfectly, making it the obvious choice for almost any building project - old or new.The MAGNA3 is of the canned-rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid.The innovative clamp with only one screw enables easy repositioning of the pump head. The MAGNA3 is a pump with no maintenance requirements and with extremely low Life Cycle Cost.The pump is characterised by the following: controller integrated in the control box control panel with TFT display on the control box control box prepared for optional CIM modules built-in differential-pressure and temperature sensor cast-iron pump housing (depending on model) carbon-fibre-reinforced composite rotor can stainless-steel bearing plate and rotor cladding aluminium alloy stator housing air-cooled power electronicsThe MAGNA3 is a single-phase pump.Characteristic features AUTOADAPT. FLOWADAPT and FLOWLIMIT (more than a pump function as it reduces the need for pump throttling valves). Proportional-pressure control. Constant-pressure control. Constant-temperature control. Constant-curve duty. Max. or min. curve duty. Automatic Night Setback. No external motor protection required. Insulating shells supplied with single-head pumps for heating systems. Large temperature range where the liquid temperature and the ambient temperature are independent of each other.CommunicationThe MAGNA3 enables communication via the following: wireless Grundfos GO Remot

EUR 1226.86

1

Grundfos magna3 25-100 cirkulating pump 180 mm - Pumput - 97924247

MAGNA3 40-100 FMAGNA3 - More than a pumpWith its unrivalled efficiency, all-encompassing range and built-in communication capabilities plus functionalities replacing system components, the MAGNA3 is ideal for engineers and specifiers looking to create high-performance systems for buildings. This pump in the Grundfos Master Class will fit both heating and cooling applications perfectly, making it the obvious choice for almost any building project - old or new.The MAGNA3 is of the canned-rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid.The innovative clamp with only one screw enables easy repositioning of the pump head. The MAGNA3 is a pump with no maintenance requirements and with extremely low Life Cycle Cost.The pump is characterised by the following: controller integrated in the control box control panel with TFT display on the control box control box prepared for optional CIM modules built-in differential-pressure and temperature sensor cast-iron pump housing (depending on model) carbon-fibre-reinforced composite rotor can stainless-steel bearing plate and rotor cladding aluminium alloy stator housing air-cooled power electronicsThe MAGNA3 is a single-phase pump.Characteristic features AUTOADAPT. FLOWADAPT and FLOWLIMIT (more than a pump function as it reduces the need for pump throttling valves). Proportional-pressure control. Constant-pressure control. Constant-temperature control. Constant-curve duty. Max. or min. curve duty. Automatic Night Setback. No external motor protection required. Insulating shells supplied with single-head pumps for heating systems. Large temperature range where the liquid temperature and the ambient temperature are independent of each other.CommunicationThe MAGNA3 enables communication via the following: wireless Grundfos GO Remot

EUR 1045.15

1

Grundfos magna3 50-60 f 240 1x230v pn6/10 - Pumput - 97924281

MAGNA3 50-60 FMAGNA3 - More than a pumpWith its unrivalled efficiency, all-encompassing range and built-in communication capabilities plus functionalities replacing system components, the MAGNA3 is ideal for engineers and specifiers looking to create high-performance systems for buildings. This pump in the Grundfos Master Class will fit both heating and cooling applications perfectly, making it the obvious choice for almost any building project - old or new.The MAGNA3 is of the canned-rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid.The innovative clamp with only one screw enables easy repositioning of the pump head. The MAGNA3 is a pump with no maintenance requirements and with extremely low Life Cycle Cost.The pump is characterised by the following: controller integrated in the control box control panel with TFT display on the control box control box prepared for optional CIM modules built-in differential-pressure and temperature sensor cast-iron pump housing (depending on model) carbon-fibre-reinforced composite rotor can stainless-steel bearing plate and rotor cladding aluminium alloy stator housing air-cooled power electronicsThe MAGNA3 is a single-phase pump.Characteristic features AUTOADAPT. FLOWADAPT and FLOWLIMIT (more than a pump function as it reduces the need for pump throttling valves). Proportional-pressure control. Constant-pressure control. Constant-temperature control. Constant-curve duty. Max. or min. curve duty. Automatic Night Setback. No external motor protection required. Insulating shells supplied with single-head pumps for heating systems. Large temperature range where the liquid temperature and the ambient temperature are independent of each other.CommunicationThe MAGNA3 enables communication via the following: wireless Grundfos GO Remote

EUR 2692.46

1

Grundfos scala2 3-45 1x200-240v 50/60hz - Pumput

Grundfos SCALA2 is a fully integrated, self-priming, compact waterworks for pressure boosting in domestic applications.SCALA2 incorporates integrated speed control enabling the keeping of the perfect pressure at the taps, meaning that the pump performance will increase with increasing demand.SCALA2 can be installed in three easy steps:1. Connect the pipes.2. Prime the pump.3. Plug the pump into the power outlet and the pump will start.Grundfos SCALA2 has all the components necessaryto ensure a comfortable pressure:• intelligent controller• integrated speed-controlled drive• integrated tank• integrated sensors• integrated non-return valves.As it is self-priming, the SCALA2 is able to pump water from a level below the pump. Provided it is filled with water, the pump is able to lift water from a depth of 8 m in less than 5 minutes. This facilitates easy installation and start-up of the pump and provides more reliable water supply in installations where there is a risk of dry running and leakages in suction hose or pipes.If exposed to dry running, water shortage or excessive temperature, blocked pump, for example in case of seizure or overload, the pump will stop automatically, thus preventing a motor burnout.The pump features an automatic reset function. In case of dry running or similar alarm, the pump will stop. Restarting will be attempted every 5 minutes 8 times, there after new restart attemps will occur every 24 hours. The automatic reset function can be deactivated.Thanks to its hydraulic design, permanent magnet motor and water cooling, the pump is extremely low-noise, 47 dB(A) in typical use, which makes it suitable for indoor as well as outdoor use.Max. Noise level at full load are 53 dB(A)The built-in pressure tank reduces the number of starts and stops in case of leakages in the pipe system, causing less wear on the pump.SCALA2 require no maintainance, but it is recommended to keep the pump clean, check t

EUR 1062.66

1

Tuotemerkki

Kauppias

Hinta (euroa)