42 resultater (0,34181 sekunder)

Vis alle filtre

Mærke

Vis alle

Køn

Butik

Vis alle

Pris (EUR)

Nulstil filter

Produkter
Fra
Butikker

KREG Pocket-Hole Jig 720PRO

KREG Pocket-Hole Jig 720PRO

- The Kreg Pocket-Hole Jig 720PRO is the most advanced jig yet from Kreg® with features that make project building incredibly efficient. One-motion clamping with Automaxx automatically adjusts to the exact material thickness and clamps seamlessly for pieces from 13 mm to 38 mm thick. GripMaxx Anti-Slip Material holds the project piece secure so you never have to worry about it shifting while you drill pocket holes and a dust collection attachment connects to your vacuum to keep your workspace dust-free. The jig has a sturdy, steel reinforced spine and hardened steel drill guides for precise and high-quality performance. The on-board tool storage keeps accessories like the hex wrench and drill bits close at hand. Included with the 720PRO are the Kreg® Docking Station material support wings with a repeatable stop, as well as a Pocket-Hole Jig Clamp. Use the Pocket-Hole Jig Clamp to secure the jig to a workstation, while material support wings add support when drilling into large pieces. Best of all, the wings fold up and stow away easily when not in use. These premium additions provide more storage, more material support, and more stability.

DKK 1678.00
1

KREG Clamp Station with Automaxx

KREG Clamp Station with Automaxx

- Product information "Clamp Station with Automaxx®"Ultimate Clamping Solution for Kreg Joineryperfect for JoineryThe Kreg Clamp Table is the ultimate clamping solution for Kreg Joinery and works with the entire family of Clamp System Components. If you’ve ever struggled to get perfectly flush Kreg Joints, failed to get your clamps positioned exactly where you need them, or needed an extra set of hands around the workshop, the Kreg Clamp Table is your perfect solution.Note: This is the same table included in the Clamp Table and Steel Stand Combo, but comes without the stand so that you can place it wherever you need it.Auto-Adjust TechnologyThanks to Automaxx® Auto-Adjust Technology, included Bench Clamps adjust to match material thickness automatically with a simple squeeze of handles—whether the material is thick, thin, or in between. You can clamp a 2x4 and then a piece of 1/2" plywood without ever readjusting the clamp.​​Durable Work SurfaceMade from glue-resistant melamine, this large 21 3/4" x 33 3/4" work surface is perfect for sanding, sawing, drilling, routing, joining, and almost any other woodworking task.Flexible PositioningStop working around your clamps and start working with them. The Clamp Trak allows you to position your Kreg Bench Clamps and Clamp Blocks anywhere along the table’s edge and quickly remove them to regain your flush work surface.Precise AlignmentMade from durable, impact-resistant plastic, Kreg Clamp Blocks can be positioned anywhere along the Clamp Trak, allowing you to quickly register your workpieces and align your project.Versatile ClampingThe Kreg Bench Clamp is great for almost any woodworking task. It slides across the Clamp Trak, rotates 360 degrees, and locks firmly into place wherever you need it most.Technical SpecificationsWork Surface Replaceable, glue-resistant melamineClamping Surface 21 3/4" x 33 3/4" (552mm x 857mm)Compatible With Multi-Purpose Shop StandIncludes21 3/4" x 33 3/4" (552mm x 857mm) glue-resistant melamine work surface24" x 36" (609mm x 914mm) melamine-coated table base(2) 3" (76mm) Bench Clamps with auto-adjusting technology(2) lengths of Clamp Trak(5) Clamp BlocksAssembly hardwareOwner's manual

DKK 2577.50
2

KREG Foreman Pocket-Hole Machine

KREG Foreman Pocket-Hole Machine

- Built with professionals and hobbyists in mind, the Foreman Pocket-Hole Machine is packed with features that will have you building with twice the speed and half the effort of a standard pocket-hole jig. Create pocket holes with amazing speed and accuracy time and time again. Simply pull the large control handle to start the powerful 230-volt motor, clamp your workpiece securely in place, and raise the drill bit through the table. This simple operation drills a precisely-placed pocket hole at the perfect depth in materials from 12-38 mm thick. To ensure perfect pocket hole placement, the Foreman DB210 features a tool-free adjustable fence that positions your workpiece for precise pocket depth, and a pair of adjustable, spring-loaded stops that provide repeatable accuracy. Plus, clear markings in the table make it easy to position the fence for your material thickness. The Foreman comes with a standarKreg stepped drill bit to get you started. It's also compatible with the Kreg Micro-Pocket Bit to create more compact pocket holes in thinner material, and the Kreg HD (Heavy-Duty) Bit for creating strong joints in material from 38mm. The built-in storage tray is the perfect place to store extra bits and accessories, keeping them close at hand. The Foreman also includes a dust collection attachment to keep your work area clean.

DKK 3744.00
1

KREG MortiseMate Loose Tenon Jig

KREG MortiseMate Loose Tenon Jig

- Cut mortises (loose tenon joinery) with just a drill Tenons available in 6 mm, 8 mm, and 10 mm thicknesses Auto-indexing step-down mechanism lowers cutter tip in 1/16" increments Quick setup for panels and 90-degree joints Micro adjustment screws allow for customizable mortise width Integrated mini work surface for quick and secure workpiece clamping Precise, consistent mortise depth control Fits workpieces 1/2" to 1 1/2" thick Carbide-tipped 6 mm Mortising Cutter included Laser-etched markings on the cutter make it quick and easy to position the stop collar for commonly used mortise depths, with adjustability for custom tenon fitting 8 mm and 10 mm cutters also available

DKK 3346.00
1

KREG Arbejdsbord Mobile Project Center KWS1000

KREG Arbejdsbord Mobile Project Center KWS1000

- Make any place your workspace. Work on projects wherever, whenever, and however you need to!MultifunctionalThe Mobile Project Center is a workbench, sawhorse, assembly table, and clamping station all in one — a versatile workspace for DIY, repair, and woodworking projects. It’s easy to set up and store away, and it provides a sturdy platform for all kinds of project tasks. Plus, the Mobile Project Center includes clamping accessories, so it’s ready to go to work, right out of the box.portable WorkspaceThe Mobile Project Center provides a portable workspace that can be used for a wide variety of project tasks. In one mode, it’s a sturdy sawhorse that’s great for supporting long boards as you cut. Flip the large tables into position and this product offers the features you’d expect to find in a high-end stationary workbench.Clamp Track for Automaxx ClampThe Clamp Trak and included Bench Clamp with Automaxx® Auto-Adjust Technology provide multiple ways to hold workpieces. The open tables can support up to 158kg (350 pounds), and have built-in storage trays, holsters for your drill, and more. A shelf underneath holds up to 11.3kg (25 pounds) of supplies and tools out of the way but close at hand while you work.ideal for Kreg JoineryIn addition to being great for general project use, the Mobile Project Center is perfect for Kreg Joinery. Whether you’re drilling pocket holes, clamping cases or face frames together, or preparing your project for final assembly, the Mobile Project Center makes Kreg Joinery even easier.create your own workspaceThe Mobile Project Center is simple to use. Just spread the legs, and it’s set up as a sawhorse. You can even add a 2x4 cutting surface using the included hardware. Flip one or both tables into position, and the Mobile Project Center is ready to take on many other tasks. When you’re done, simply pull the tabs on the table braces, fold the tables down, and close the legs, and the Mobile Project folds down for easy, out-of-the-way storage.XXL WorkbenchThere are also multiple ways to use two Mobile Project Centers together. You can attach two side-by-side for an extra-large surface, or span between two benches by placing 2x4s in the included brackets. That lets you create a large surface for cutting big pieces, or an extra-large workbench by resting a piece of plywood on the 2x4 boards. Technical SpecificationsWork Surface 70x80cm (27 3/4" x 31 1/2")Table Height 80cm (31 1/2")Load Capacity 158kg (350 lbs.)Storage Shelf 45x66cm (17 3/4" x 26")Folds 16.5cm (6 1/2") thick when foldedWeight 18kg (40 lbs.) Includes(1) Mobile Project Center(1) Kreg Bench Clamp with Automaxx® Technology(4) Kreg Bench Dogs(2) support brackets(2) Trak bushings(2) connection keys(1) owner’s manual

DKK 2371.00
1

KREG Multi-purpose shop stand

KREG Multi-purpose shop stand

- Adjustable, Customizable Built-To-Last This durable, good-looking stand is made from durable steel and can be adjusted 787mm to 991mm in height. The 508 mm x 711 m stand comes equipped with levelers to compensate for uneven floors. Plus, the stand has predrilled holes that make it easy to mount accessories and to customize the stand. Versatile, System-Ready Design The Multi-Purpose Shop Stand is the perfect foundation for all Kreg® table top solutions, including the Clamp Station and the Precision Router Table Top. You can also use it to create a custom tool or work stand for your shop.

DKK 1800.00
1

KREG Universal Clamp Track Kit 2769

KREG Universal Clamp Track Kit 2769

- Universal Clamp Trak Kits offer a great new clamping solution that will help you accomplish a wide variety of common woodworking tasks. The Kits do this by allowing you to incorporate the versatile clamping capability into any workbench whether it's a new or existing bench. This Universal Clamp Trak Kit comes with anodized aluminum Traks plus hardware and instructions that show you how to incorporate them into your workbench. With these Traks and couple of Kreg Bench Clamps (sold separately), you will be able to have a workbench and a multipurpose clamping station in one unit that can hold pieces large or small. The Traks can be surface mounted by bolting them to the bench surface 19 mm thick or thicker. Or they can be flush mounted by bolting them to a surface, and then adding a layer of 19 mm thick material.

DKK 1734.25
1

KREG Precision Band Saw Fence

KREG Precision Band Saw Fence

- Never before has a band saw fence allowed you to accomplish such a wide variety of cuts. This fence adjusts both for blade drift and perpendicularity to the blade (essential when cutting thin veneers). In addition, the fence can be quickly changed to a low-profile position to allow the blade guides to be moved closer to the workpiece. Plus, the fence can accept re-saw guides or Kreg® Stops for use in additional applications. The aluminum fence is incredibly strong, straight, and built to last for years to come. The face and top of the fence contain T-slots for adding stops, re-saw guides, and more. Easy to Remove When you don't need the fence, remove it in seconds no tools required! Just loosen the locking knob and lift the fence from the mounting rail, which is located below your tables surface so it wont't get in the way. Precision Lens Cursor Magnified and easy-to-read for even the smallest adjustments, the thin red line on the Precision Lens Cursor lets you accurately set up the fence for cutting veneer, tenons, and more. Adjustable in Two Dimensions This fence is unique in that it adjusts to set up perfectly square to your table and blade. Two simple adjustments allow you to set the fence to match blade drift, greatly enhancing cutting accuracy.

DKK 1800.00
1

KREG Overfræser bord "bordmodel"

KREG Overfræser bord "bordmodel"

- Product information "Precision Benchtop Router Table"Full-Size Router Table Capability in a Portable PackageKreg’s Precision Benchtop Router Table offers more features that give it the capability of a full-size, industrial router table in a portable package. Whether you want a router table to use on a job site or a compact router table to use in the shop, the Precision Benchtop Router Table is a perfect routing solution for you.Rugged Table TopThe table top is made from an edge-banded, vibration- and noise-resistant MDF, and features an Easy-Slide Micro-Dot skin. The skin is constructed from a high-pressure laminate, which allows you to easily slide workpieces across the surface.Precise Insert PlateThe Precision Router Table Insert Plate measures 3/8" x 91/4" x 113/4" to support even the biggest routers, and it features Kreg’s new Level-Loc Reducing Rings. These rings twist into place and lock in flush with the plate surface every time. Three Level-Loc rings are included: 1", 13/16" (for use with Porter-Cable style guide bushings), and 21/8". More Level-Loc ring sizes are available in a set of 5 (sold separately). The plate also has laser-engraved markings on the underside that make it easy to mount any router, and it comes with a set of Kreg’s Precision Insert Levelers.Full-Featured FenceThe heavy-duty aluminum fence has been redesigned, too, with new quarter-turn locking levers. They allow quick fence adjustment and confident locking, plus are sized so they're easy to use but stay out of the way behind the fence. The fence also has independent sliding faces that provide increased workpiece support around the bit, and, with the use of the included jointing rods, allow the table to be used as a vertical jointer. A bit guard and a dust-collection port are also included.Quiet RoutingDuring development, we found the majority of noise produced by benchtop router tables was caused by vibrations traveling through the body of the table, and that much of this noise could be muted by using the proper design and materials. By combining a noise-absorbing MDF table top with a rigid steel base and vibration-dampening rubber feet, our Precision Benchtop Router Table is incredibly quiet and actually tests quieter than most enclosed router tables.Built for Industry Professionals On the GoThis table was built to withstand years of heavy use on the job site. It features a stamped-steel foundation, four hard-wearing rubber feet, an edge-banded table-top with impact-resistant Micro-Dot surface, and an incredibly rigid aluminum fence.Technical Description:Level-Loc Insert Plate Dimensions9,5mm x 235mm x 298mmInsert Plate Material PhenolicTable Surface Dimensions 406mm x 609mmFence Material Aircraft-grade, anodized aluminumOverall Dimensions 508mm x 718mm x 514mmOverall Product Weight 12kg Includes:(1) Precision Benchtop Router Table(1) insert plate with Level-Loc rings(4) plate levelers(1) aluminum fence with dust-collection port(1) bit guard(2) jointing rods(1) assembly hardware(1) owner's manual

DKK 3437.00
1

KREG Længdeanslag til kapsav

KREG Længdeanslag til kapsav

- Product information "Miter Saw Station Kit"Take the guesswork out of cutting wood to length.Take the guesswork—and your tape measure and pencil—out of cutting wood to length. Our Precision Trak and Stop Kit allows you to turn a miter saw into a precise cutting system. Simply position the stop at the dimensions you'd like to cut using the precision lens cursor, place the board against the stop, and cut to that exact length every time. You build the support wings out of plywood (or another sheet material), and then add the Trak. Outfitting your saw to cut perfectly-sized workpieces couldn’t be simpler!Perfect for a Variety of ApplicationsThe most common setup for the Precision Trak & Stop Kit is with a miter saw, but many woodworkers find it handy to add to their radial arm saw or drill press. No matter where you use the Precision Trak & Stop Kit, you’ll find it much faster and accurate than any other wood-cutting method.Production StopDesigned to stand up to the rigors of repetitive cuts in an industrial environment, the Production Stop drops onto the top of the fence and features dual lens cursors for convenient use on either side of the blade.Swing StopThe Swing Stop gives you a precise measurement when you need it and swings out of the way when you don’t Simply push a board into the curved face of the stop to push it temporarily up out of the way, or swing the stop up. Like the Production Stop, it features a Precision Lens Cursor for fast, pinpoint positioning.Shop-Made Support WingsBuild a simple plywood or MDF box to match the height of your saw, and then add a back fence that reaches 57mm above the saw table for the stops to glide upon. Instructions and mounting hardware for the Trak are included.Rigid Aluminum FenceIncredibly strong and built-to-last, our anodized-aluminum Trak features an L-shaped base that makes alignment and mounting to any 3/4" (19mm) thick board a snap. The Trak has a groove along the top to accept the included self-adhesive measuring tapes. The Trak is split into four 2' (610mm) long sections, giving you setup options: 4' (1219mm) on each side of the saw, 2' (610mm) on one side and 6’ (1829mm) on the other, or all 8' (2438mm) on one side.Technical DescriptionFence Aircraft-grade aluminumFinish Anodized for easy clean-upCutting Capacity 2438mm minimumLength (4) 610mm sections for total 2438mm of Trak lengthMeasuring Tape (1) 12' (3658mm) left-to-right reading(1) 12' (3658mm) right-to-left reading

DKK 1620.00
1

KREG Precision Router Table Fence

KREG Precision Router Table Fence

- This innovative, anodized-aluminum fence features a table saw-style T-square adjustment system that ensures the fence will always stay parallel to the miter-gauge slot. The fence adjusts easily with just one hand, and locks firmly in place with dual locks: A large paddle lock on the infeed end, and a quarter-turn lock on the outfeed end that prevents fence deflection. A magnified measuring system with an adjustable measuring scale allows accurate setup with any bit. The included Micro-Adjuster allows you to dial in precision measurements exactly. Independent sliding fence faces can be positioned exactly where needed to provide workpiece support close to the bit, and to maximize chip collection into the fences built-in dust port. Two jointing rods come included in this system. Just slide them into position behind the outfeed fence face, and the fence doubles as a jointer for putting perfect edges on boards.

DKK 2250.00
1

KREG Accu-Cut XL 2450mm

KREG Accu-Cut XL 2450mm

- TRANSFORM YOUR CIRCULAR SAW INTO A HIGH-PERFORMANCE TRACK-GUIDED CUTTING TOOL FOR BREAKING DOWN FULL SHEETS OF PLYWOOD WITH CUTS UP TO 100"Set your projects up for success by making straight, accurate, splinter-free cuts with the Accu-Cut XL Circular Saw Track Guide. It rips, crosscuts, and makes angled cuts up to 100" long in plywood, MDF, and other large panels with accuracy and control.The Accu-Cut XL guides your circular saw along an extended-length aluminum track that holds the saw steady and keeps your cuts straight. The track guide is designed for simplicity: just mount your saw to the Universal Sled, align the Accu-Cut XL track to the cut line, and make the high-quality cuts you need. The anti-chip guide strips prevent splintering and tearout through the entire length of your cut. The same strips also feature an anti-slip surface that holds the track in place without clamps.

DKK 1856.25
1

KREG Precision Router Table Top

KREG Precision Router Table Top

- This rugged High Performance Router Table Top provides a solid, secure, and quiet routing solution for any workshop. A 25mm MDF core provides a flat, solid top that absorbs vibrations, while steel reinforcing struts prevent sagging - even under the weight of heavy routers and lifts. A durable, high-pressure laminate skin offers a low-friction Easy-Slide surface, making it easy to slide workpieces across the surface. Thick edgebanding protects the top against bumps and abrasions. The top is predrilled for holes for Precision Insert-Plate Levelers. A heavy-duty 9mm x 235mm x 298mm insert plate handles large routers with ease. Versatile Level-Loc Reducing Rings lock in level and flush with the plate surface with the included ring wrench. A brass starter pin ensures controlled bit contact during freehand routing. The laser-engraved target pattern on the underside of the plate ensures simple, accurate router centering and mounting. The 4 included Precision Insert Plate Levelers keep plate and table top surfaces perfectly flush. This versatile table top works with standard 9,5mm x 19mm miter gauge guide bars. It also accepts Featherboards and other accessories, and is made from durable anodized aluminum.

DKK 2888.00
1

KREG Precision Miter Gauge System

KREG Precision Miter Gauge System

- One Miter Gauge with Everything You Need for AccuracyWhy spend your time calibrating a miter gauge when you can get factory-calibrated accuracy right out of the box? Our Precision Miter Gauge requires no calibrating, and features positive stops at 0°, 10°, 221/2°, 30° and 45°, making it easy to cut miters quickly.Of course, when you do want to cut a more complicated angle, the easy-to-use Vernier scale allows for fast adjustments to 1/10th of a degree.Plus, the Precision Miter Gauge System offers a long, anodized-aluminum fence and stop system that let you easily make accurate, repeatable cuts.Perfect Miters, Fast!Precision is the name of the game for this CNC-milled miter gauge. We build accuracy into every feature of this product from the adjustable miter bar to the easy-to-use, incredibly accurate Vernier scale. With all of its great features, this miter gauge will give you better, more accurate cuts to ensure project success.Precision Lens CursorSimilar to the type of lens found on a quality table saw rip fence, the clear lens features a high-visibility red line that makes it easy to set the Swing Stop for precise cuts, time after time.No Play in the Miter SlotOur extremely straight 24" (610mm) anodized aluminum bar is 3/8" (9.5mm) thick by 3/4" (19mm) wide, and features five bar adjusters that you can adjust to eliminate “play” in the miter slot with the simple turn of a screw driver.Swing StopThe Swing Stop slides effortlessly along the fence of the Precision Miter Gauge and locks securely into place with the turn of a knob. It also features a curved foot that lets you easily swing the stop temporarily out of the way without having to remove it. That means you can quickly square one end of a board, flip it around, and then cut it to final length without ever moving the stop.Add a Versatile FenceThe curved foot of the Swing Stop can be used as ’s “break-away” design allows you to add a versatile, heavy-duty fence to your Miter Gauge.Technical SpecificationsT-Slot Bar 24" (610mm) long, 3/8" (9.5mm) tall, 3/4" (19mm) widePositive Stops 0°, 10°, 22 1/2°, 30° and 45°Vernier Scale Adjusts to 1/10th of a degreeFinish Anodized for easy clean-upCalibration Factory-calibrated; perfect right out of the boxIncludes(1) Miter Gauge, 24" (610mm) Fence with scale(1) zero-return stop(1) Swing Stop with Precision Lens Cursor(1) self-adhesive measuring tape(1) owner's manual

DKK 1706.00
1

KREG Overfræser lift "Precision Router Lift"

KREG Overfræser lift "Precision Router Lift"

- Product information "Precision Router Lift"Product details:Quality made in Germany: construction made of high-quality aluminium and steel.Height fine adjustment to 1/10mm: extremely precise adjustment, with exact scaling and effective spindle lock, easily operated via hexagon socket screw.Smooth-running spindle columns: allow for continuous and exact fine height adjustment.Routing without rip fence: 2 drill holes for the rip fence pin enable free routing of e.g. round workpieces without rip fence.Easy mounting: mount the router to the RL2.0K using pre-drilled mounting holes (hole pattern in operating instructions).Absolutely flat: easy levelling of the RL2.0K by means of levelling screws in the insert plate.Laser scaling: millimeter scale on the surface for exact alignment of the rip fence.No need to drill your own holes: mounting holes (countersunk head) for quick router table installation are already pre-drilled.Special feature of the 2nd generation:The magnetic reduction plates offer more choice and control in choosing the right hole size. Perfectly adapted to the size of the router cutter - especially for small workpieces, "getting stuck and stuck" at the edge of the hole is eliminated.Magnets for attaching additional accessories are distributed over the entire reduction plate.Additional recessed grip for easy changing of the reduction plates.Compatible Routers:Bosch: POF1200AE, POF1300, POF1400ACE , GOF1250CE/LCE, GMF1600CE, GOF1600CECasals: CT2200VCEDeWalt: DW615, DW621, DW622, DW624, DW625, DWE627KT-QSElu: MOF96(E), MOF97(E), MOF131, MOF177(E), MOF 177/02 Type 2Festool: OF1400Freud: FT2000 (Diabolo), FT2200VCEMafell: LO 65 ECMakita: RP1110Perles: OF3-808(RE), OF9(E)Trend: T5, T10, T11Würth: OF1100EExceptions: ELU MOF 96/02 (no tapped holes available), Festool OF2000, OF2200 and DeWalt DW626 (these are too large in the entire circumference and cannot be fitted into the lift construction).Technical Data:Dimension insert plate: 298 x 235 x 9 mmCorner radius of insert plate: 6 mmDistance from the top edge of the inlay plate to the base plate of the mounted router: 15 mm (loss of routing depth)Height adjustment travel/rotation: 4 mmHeight router lift (max. extended): 240mmMax. cutter diameter: 86 mmMax. adjustment travel: 105 mmWeight: 4,5 kgDelivery includes:1x router lift RL2.02x reduction plates Ø 32 and 68 mm1x hexagon screwdriver 5x150 mm4x fixing screws M6x50, washers and nuts18x mounting screws (various sizes)8x levelling screws M5x81x instruction manual (german & english)

DKK 3750.00
1