71 resultater (0,31648 sekunder)

Vis alle filtre

Mærke

Butik

Pris (EUR)

Vis alle

Nulstil filter

Produkter
Fra
Butikker

Noctua NT-H2, 3.5g -lämpötahna

Noctua NT-H2, 3.5g -lämpötahna

Based on the award-winning nt-h1nt-h2 is based on noctua’s renowned nt-h1, which has received more than 150 awards and recommendations from international hardware websites and magazines. Chosen again and again by overclockers and enthusiast users worldwide, nt-h1 has established itself as a benchmark for premium-quality thermal interface materials (tims).next-generation performancefurther improving the award-winning nt-h1, nt-h2 uses a new, fine-tuned mixture of metal oxide micro-particles for even lower thermal resistance and reduced bond-line thickness at typical mounting pressures. This allows it to achieve even better performance in most application scenarios.easy to applythanks to its excellent spreading properties, there is no need to manually spread nt-h2 before installing the cooler: simply apply some paste onto the cpu (see instructions for details), put on the heatsink and you’re ready to go!easy to clean with included wipesthe 3.5g pack of nt-h2 includes three large na-cw1 cleaning wipes that are pre-moistened with an isopropyl alcohol mixture and make it child’s play to remove: simply wipe off the paste from the cpu and the base of the cooler using one of the wipes and you’re done!optional na-scw1 set for power userspower users who take off and install their coolers frequently can purchase the optional na-scw1 set that contains 20 pieces of the na-cw1 cleaning wipes, which are ideal for removing nt-h2 from the heat-spreader of the cpu and the contact surface of the heatsink.not electrically conductive, non-corrodingwhile some high-end thermal compounds and pads are risky to use due to their electrical conductivity or corroding properties, there’s no risk of short-circuits with nt-h2 and it’s completely safe to use with any type of cpu cooler, regardless of whether it’s made from copper or aluminium and whether it’s nickel-plated or not.excellent long-term stabilitynt-h2 unique formula is highly stable over time, even after longer periods of usage. It can be stored at room temperature for at least 3 years and due to the compound’s exceptional curing, bleeding, dry-out and thermal cycling characteristics, it can be used on the cpu for 5 years or more.no break-in or burn-in requiredsome thermal compounds need a longer break-in period or cure time until they reach their full performance and some thermal pads must undergo a dedicated burn-in process. By contrast, nt-h2 is ready to go right away and doesn’t require any special preparations.3.5g package for 3-20 applicationssufficient for around 3-20 applications (depending on the size of the cpu or gpu, e.g. Around 3 applications for large cpus such as tr4 and around 20 for small cpus such as lga1151), the classic 3.5g packaging size is ideal for most users who only install coolers every now and then.

EUR 13.90
1

Noctua NT-H2 AM5 Edition, 3.5g -lämpötahna

Noctua NT-H2 AM5 Edition, 3.5g -lämpötahna

Nt-h2 is the further improved second generation of noctua’s award-winning hybrid thermal compound. Combining the iconic nt-h1’s proven features, superb ease-of-use and renowned long-term stability with a novel, fine-tuned formula of micro particles for even better thermal performance, nt-h2 is an enthusiast-grade paste for the highest demands. Whether it’s air- or water-based cooling, cpu or gpu applications, overclocking or silent systems: nt-h2 will consistently deliver outstanding results and thanks to the included cleaning wipes, it is just as easy to remove as to apply. The am5 edition also includes the na-tpg1 thermal paste guard that prevents thermal paste build-up in the cut-outs of the heatspreader of amd am5 cpus – a simple yet highly effective means to keep your am5 processor clean.based on the award-winning nt-h1nt-h2 is based on noctua’s renowned nt-h1, which has received more than 150 awards and recommendations from international hardware websites and magazines. Chosen again and again by overclockers and enthusiast users worldwide, nt-h1 has established itself as a benchmark for premium-quality thermal interface materials (tims).next-generation performancefurther improving the award-winning nt-h1, nt-h2 uses a new, fine-tuned mixture of metal oxide micro-particles for even lower thermal resistance and reduced bond-line thickness at typical mounting pressures. This allows it to achieve even better performance in most application scenarios.am5 edition with thermal paste guardwhen the mounting pressure of the cooling solution is applied, excess thermal paste will be squeezed outwards. With am5 cpus, this excess paste tends to accumulate in the cut-outs at the sides of the heatspreader and may become difficult to remove. Simple and risk-free to apply, the na-tpg1 prevents this undesired phenomenon.easy to applythanks to its excellent spreading properties, there is no need to manually spread nt-h2 before installing the cooler: simply apply some paste onto the cpu (see instructions for details), put on the heatsink and you’re ready to go!easy to clean with included wipesthe 3.5g pack of nt-h2 includes three large na-cw1 cleaning wipes that are pre-moistened with an isopropyl alcohol mixture and make it child’s play to remove: simply wipe off the paste from the cpu and the base of the cooler using one of the wipes and you’re done!optional na-scw1 set for power userspower users who take off and install their coolers frequently can purchase the optional na-scw1 set that contains 20 pieces of the na-cw1 cleaning wipes, which are ideal for removing nt-h2 from the heat-spreader of the cpu and the contact surface of the heatsink.not electrically conductive, non-corrodingwhile some high-end thermal compounds and pads are risky to use due to their electrical conductivity or corroding properties, there’s no risk of short-circuits with nt-h2 and it’s completely safe to use with any type of cpu cooler, regardless of whether it’s made from copper or aluminium and whether it’s nickel-plated or not.excellent long-term stabilitynt-h2 unique formula is highly stable over time, even after longer periods of usage. It can be stored at room temperature for at least 3 years and due to the compound’s exceptional curing, bleeding, dry-out and thermal cycling characteristics, it can be used on the cpu for 5 years or more.no break-in or burn-in requiredsome thermal compounds need a longer break-in period or cure time until they reach their full performance and some thermal pads must undergo a dedicated burn-in process. By contrast, nt-h2 is ready to go right away and doesn’t require any special preparations.3.5g package for 3-20 applicationssufficient for around 3-20 applications (depending on the size of the cpu or gpu, e.g. Around 3 applications for large cpus such as tr4, 15 for am4/am5 or lga1700, and around 20 for small cpus such as lga1151), the classic 3.5g packaging size is ideal for most users who only install coolers every now and then.

EUR 16.90
1

Noctua NH-D9 TR5-SP6 4U D-Type -prosessorijäähdytin

Noctua NH-D9 TR5-SP6 4U D-Type -prosessorijäähdytin

The nh-d9 tr5-sp6 4u is a 92mm size premium quality quiet cpu cooler for workstations and servers based on amd threadripper and epyc processors that utilise tr5/sp6 sockets (strx5/swrx9). Built on the proven basis of the dx model with its dual tower heatsink and full-cover contact surface, the tr5-sp6 revision employs two of noctua’s award-winning, pwm controlled nf-a9 pwm 92mm fans in their higher speed variant in order to achieve strong performance and superb acoustics. The nh-d9’s direction of airflow is parallel to the long axis of the socket, so it is ideal for builds where the hot air is exhausted this way. Topped off with the pre-applied nt-h2 thermal compound as well as the professional secufirm2™ mounting system for tr5/sp6 that has been updated to meet the platform’s increased pressure specifications, the nh-d9 tr5-sp6 4u forms a complete premium quality package for quietly cooling tr5-based threadripper workstations and sp6-based epyc servers in 4u cases.proven heatsinks for amd threadripper & epycfirst introduced in 2017, noctua’s threadripper and epyc coolers have become a standard choice when it comes to quiet, premium grade air cooling solutions for amd-based workstations and servers. Thanks to their superior acoustic efficiency, they are ideal for threadripper and epyc systems that run in noise sensitive environments (e.g. Audio/video production, content creation, engineering, etc.).enlarged contact surfaceat 70x56mm, the heatsink’s copper contact surface is more than double the size of the standard desktop model. Tailored to fit the enormous integrated heat-spreaders (ihs) of amd’s tr5/sp6 based processors, this customised design allows for an optimal heat flow from the cpu over the base to the heatpipes and on to the cooling fins.compact 92mm size for best compatibilitythanks to its compact footprint (95x95mm with centre fan only, second fan can be installed on either side depending on available space) and a total height of only 134mm, the nh-d9 tr5-sp6 4u provides excellent pcie compatibility and is small enough to fit most 4u size rack-mount enclosures.airflow parallel to long axis of the socketthe nh-d9’s direction of airflow is parallel to the long axis of the tr5/sp6 socket, so it is ideal for systems where the exhaust fans of the chassis are in this direction. For systems that require the airflow to go perpendicular to the long axis of the socket, please choose the nh-u14s tr5-sp6 or adapt nh-u12s dx-4677 and nh-u9 dx-4677 coolers using the nm-tr5-sp6 kit.dual nf-a9 hs-pwm fansthe nh-d9 tr5-sp6 4u is equipped with two of noctua’s award-winning nf-a9 pwm 92mm fans in their high-speed 2500rpm hs-pwm variant. This push/pull dual fan configuration makes it possible to achieve a level of cooling performance that is remarkable for such a compact cooler.pwm unterstützung und y-kabelthe nf-a9 premium fans supplied with the nh-d9 tr5-sp6 4u support pwm for convenient automatic speed control through the motherboard, which allows them to run near silent at lighter loads and to speed up only when necessary. The supplied splitter cable makes it possible to power and control both fans simultaneously from a single motherboard fan header.secufirm2™ mounting for tr5-sp6the nh-d9 tr5-sp6 4u combines the proven basis of the dx model with new mounting brackets for amd’s tr5/sp6 socket (strx5/swrx9). Installation is just as easy as with the previous tr4-sp3 models: put on the heatsink, fix the four spring-loaded allen key screws using the supplied tool and you’re done!pre-applied nt-h2 thermal compoundnoctua’s much-acclaimed nt-h2 is a pro-grade tim solution that provides minimum thermal resistance and outstanding long-term stability. Having the paste pre-applied to the heatsink base ensures optimal bond-line thickness and saves precious time in installation. Ideal for system integrators!

EUR 128.90
1

Noctua NH-U14S TR5-SP6 U-Type Premium -prosessorijäähdytin

Noctua NH-U14S TR5-SP6 U-Type Premium -prosessorijäähdytin

The nh-u14s tr5-sp6 is a 140mm size premium quality quiet cpu cooler for workstations and servers based on amd threadripper and epyc processors that utilise tr5/sp6 sockets (strx5/swrx9). Built on the proven basis of the renowned tr4-sp3 model with its large heatsink and full-cover contact surface, the tr5-sp6 revision employs two of noctua’s award-winning, pwm controlled nf-a15 140mm fans in order to achieve maximum performance and superb acoustics. Topped off with the pre-applied nt-h2 thermal compound as well as the professional secufirm2™ mounting system for tr5/sp6 that has been updated to meet the platform’s increased pressure specifications, the nh-u14s tr5-sp6 forms a complete premium quality package for quietly cooling tr5-based threadripper workstations and sp6-based epyc servers.proven heatsinks for amd threadripper & epycfirst introduced in 2017, noctua’s threadripper and epyc coolers have become a standard choice when it comes to quiet, premium grade air cooling solutions for amd-based workstations and servers. Thanks to their superior acoustic efficiency, they are ideal for threadripper and epyc systems that run in noise sensitive environments (e.g. Audio/video production, content creation, engineering, etc.).enlarged contact surfaceat 70x56mm, the heatsink’s copper contact surface is more than double the size of the standard desktop model. Tailored to fit the enormous integrated heat-spreaders (ihs) of amd’s tr5/sp6 based processors, this customised design allows for an optimal heat flow from the cpu over the base to the heatpipes and on to the cooling fins.140mm size for maximum performancewith six heatpipes, a fin surface area of more than 6000cm² and two highly optimised nf-a15 140mm fans, the nh-u14s tr5-sp6 provides a superior level of quiet cooling efficiency. This makes it ideal for building cutting-edge, ultra high-performance threadripper-based workstations that run almost silent.dual nf-a15 140mm premium fansthe nh-u14s tr5-sp6 is equipped with two of noctua’s award-winning nf-a15 140mm fans. This powerful push/pull dual fan configuration allows it to achieve an unrivalled level of quiet cooling performance and makes it the first choice for workstations that require the best possible cooler, period.pwm support and splitter cablethe renowned nf-a15 140mm premium fans supplied with the nh-u14s tr5-sp6 support pwm for convenient automatic speed control through the motherboard, which allows them to run near silent at lighter loads and speed up only when necessary. The supplied splitter cable makes it possible to power and control both fans simultaneously from a single motherboard fan header.secufirm2™ mounting for tr5-sp6the nh-u14s tr5-sp6 combines the proven basis of the tr4-sp3 model with new mounting brackets that meet the increased pressure requirements of amd’s tr5/sp6 socket (strx5/swrx9). Installation is just as easy as before: put on the heatsink, fix the four spring-loaded allen key screws using the supplied tool and you’re done!offset mounting optionsthe secufirm2™ mounting for tr5/sp6 makes it possible to offset the cooler by 3 or 6mm. On motherboards with east-to-west socket orientation, this can be used to offset the cooler(s) towards the right, increasing clearance towards the i/o panel. On boards that use a north-to-south orientation of the cpu socket(s), this allows offsetting the cooler towards the upper edge of the motherboard in order to increase pcie clearance.pre-applied nt-h2 thermal compoundnoctua’s much-acclaimed nt-h2 is a pro-grade tim solution that provides minimum thermal resistance and outstanding long-term stability. Having the paste pre-applied to the heatsink base ensures optimal bond-line thickness and saves precious time in installation. Ideal for system integrators!

EUR 138.90
1

Noctua NH-D15 G2 -prosessorijäähdytin

Noctua NH-D15 G2 -prosessorijäähdytin

Nh-d15 g2 on noctuan ikonisen nh-d15:n parannettu toinen sukupolvi. Uusimman tekniikan mukaisten, nopeussäätöisten nf-a14x25r g2 pwm -tuulettimien, kahdeksan lämpöputken ja epäsymmetristen lamellipinojen ansiosta, jotka on huolellisesti hienosäädetty toimimaan yhdessä uusien tuulettimien kanssa, se saavuttaa vielä paremman hiljaisen jäähdytystehon kuin palkittu edeltäjänsä. G2-versio on todellinen lippulaivamalli, joka jatkaa alkuperäisen nh-d15:n perintöä laajentamalla ilmajäähdytyksen rajoja ja kilpailemalla monien aio-vesijäähdytysratkaisujen tehokkuuden kanssa. Entisestään parantuneen suorituskyvyn lisäksi nh-d15 g2 tarjoaa myös paremman yhteensopivuuden offset-rakenteen ansiosta, jonka ansiosta se mahtuu useimpien nykyisten emolevyjen ylimpään pcie x16 -paikkaan. Viimeisenä mutta ei vähäisimpänä g2-versio on päivitetty torx®-pohjaiseen secufirm2+™-monipesäkiinnitysjärjestelmään, jonka mukana toimitetaan nm-sd1-ruuvimeisseli, sekä noctuan ylivoimaiseen nt-h2-lämpömassaan. Lyhyesti sanottuna nh-d15 g2:ta on hiottu entisestään lähes kaikilta osin jäähdytyselementistä ja tuulettimista aina kiinnitykseen, lämpötahnaan ja tarvikepakkaukseen asti. Noctuan luotettavalla 6 vuoden valmistajan takuulla täydennettynä se on uusi ykkösvalinta asiakkaille, jotka vaativat parasta parhaista ilmajäähdytyksistä.säännöllinen allround-versio, jossa on keskikokoinen pohjan kuperuus.normaalissa nh-d15 g2:ssa käytetään samaa keskikokoisen pohjan kuperuutta kuin useimmissa muissa noctuan jäähdytyslevyissä, mikä tekee siitä täydellisen monikäyttöisen jäähdytyslevyn, joka tarjoaa optimaaliset tulokset am5-piirilevyillä mukana toimitetulla offset-kiinnityksellä ja tuoreilla, käyttämättömillä lga1700-suorittimilla, kun käytetään mukana toimitettuja nm-isw1-levyjen aluslevyjä tai niin sanottuja kontaktipuitteita, jotka vähentävät ilm-paineesta johtuvaa prosessorin muodonmuutosta.

EUR 144.00
1

Noctua NA-SAVP1 chromax.green -kiinnitystarvikepakkaus tuulettimille

Noctua NA-SAVP1 chromax.green -kiinnitystarvikepakkaus tuulettimille

The na-savp1 chromax.green is a fan accessory set consisting of 16 green na-avp1 anti-vibration pads for up to 2 compatible 120/140mm fans (see compatibility info). Made from extra-soft silicone, the na-avp1 pads minimise the transmission of minute vibrations while maintaining full compatibility with standard fan screws and most other mounting systems. At the same time, the chromax.green edition is ideal for adding green accents to noctua’s industrialppc fans in order to colour-coordinate them with individual build themes.

EUR 12.90
1

Noctua NA-SAVP1 chromax.white -kiinnitystarvikepakkaus tuulettimille

Noctua NA-SAVP1 chromax.white -kiinnitystarvikepakkaus tuulettimille

The na-savp1 chromax.white is a fan accessory set consisting of 16 white na-avp1 anti-vibration pads for up to 2 compatible 120/140mm fans (see compatibility info). Made from extra-soft silicone, the na-avp1 pads minimise the transmission of minute vibrations while maintaining full compatibility with standard fan screws and most other mounting systems. At the same time, the chromax.white edition is ideal for adding white accents to noctua’s industrialppc fans in order to colour-coordinate them with individual build themes.

EUR 10.90
1

Noctua NA-SAVP1 chromax.yellow -kiinnitystarvikepakkaus tuulettimille

Noctua NA-SAVP1 chromax.yellow -kiinnitystarvikepakkaus tuulettimille

The na-savp1 chromax.yellow is a fan accessory set consisting of 16 yellow na-avp1 anti-vibration pads for up to 2 compatible 120/140mm fans (see compatibility info). Made from extra-soft silicone, the na-avp1 pads minimise the transmission of minute vibrations while maintaining full compatibility with standard fan screws and most other mounting systems. At the same time, the chromax.yellow edition is ideal for adding yellow accents to noctua’s industrialppc fans in order to colour-coordinate them with individual build themes.

EUR 11.90
1

Noctua NH-P1 Premium -passiivinen prosessorijäähdytin

Noctua NH-P1 Premium -passiivinen prosessorijäähdytin

The nh-p1 is noctua’s first passive cpu cooler and has been custom-designed for fanless operation from the ground up: in enclosures with good natural convection, its six heatpipes and thick, widely spaced heatsink fins enable it to cool modern high-end cpus with low to moderate heat dissipation completely passively (see setup guidelines and list of recommended cases). For further enhanced performance or semi-passive setups that only spin up their fans when necessary, the nh-p1 can be outfitted with a low-speed, ultra-quiet 120mm fan such as the nf-a12x25 ls-pwm. Topped off with the professional torx-based secufirm2+ mounting system, noctua’s award-winning nt-h2 thermal compound and a 6-year manufacturer’s warranty, the nh-p1 is the ideal cornerstone for premium-grade fanless or semi-passive builds.designed for passive cooling from the ground upthe nh-p1 isn’t just a regular heatsink without a fan: it has been designed for fanless operation from the ground up, featuring much thicker, much more widely spaced fins in order to achieve both the mass and the minimal airflow resistance that are required in order to excel in natural convection cooling.fanless cooling for high-end cpusin fully optimised fanless systems, the nh-p1 is capable of cooling high-end cpus with low to moderate heat dissipation using natural convection only (see setup guidelines and cpu compatibility list). This makes it ideal for powerful builds that have no moving parts and run absolutely silent.increased performance headroom with extra fanthe nh-p1 can be fitted with an extra 120mm fan such as the near inaudible nf-a12x25 ls-pwm in order to increase its maximum dissipation capacity significantly (see setup guidelines and cpu compatibility list): ideal for short spikes of higher heat loads or semi-passive systems that only start their fans when necessary!no noise, less dust, 100% fail-prooffanless cooling doesn’t only have the advantage of being completely silent: if you’re relying on natural convection only and don’t have case fans pushing air through a case, less dust will accumulate in filters or inside the system. Last but not least, with no moving parts such as fans or pumps that could possibly fail, the nh-p1 is as fail-proof as it can be.asymmetrical layout for optimal pcie compatibilityas many current motherboards have the top pcie x16 slot sitting close to the socket, bigger heatsinks tend to block it. Due to its asymmetrical layout, the fin-stack of the nh-p1 is offset towards the upper edge of the motherboard when installed in standard orientation. This allows it to clear the top pcie x16 slot on most current µatx and atx motherboards (see motherboards compatibility list).100% ram compatibility on lga1851/lga1700 and am4/am5due to its asymmetric design, the nh-p1 does not overhang the ram slots on intel lga1851/lga1700/lga1200/lga115x and amd am4/am5 based motherboards, which ensures easy access to the modules and 100% compatibility with dimms that feature tall heat-spreaders.secufirm2+™ torx-based multi-socket mounting systemnoctua’s secufirm2™ mounting systems have become synonymous with quality, safety and easy installation. Torx-based, the professional secufirm2+™ version with its included screwdriver provides even better handling and durability. Socket support includes intel lga1851, lga1700 (since 2021), lga1200, lga115x (lga1150, lga1151, lga1155, lga1156) as well as amd am4 and am5 (since 2019).compatibility with past and future socketsthanks to noctua’s secufirm™ ecosystem, the nh-p1 can be made compatible with the older lga1366 and lga775 sockets using the optional nm-i3 mounting kit, which is provided free of charge. If technically possible, noctua will also provide upgrade kits for future sockets, which makes the nh-p1 a safe long-term investment.nt-h2 next-gen thermal compoundin high-end passive cooling, every degree counts. This is why the nh-p1 includes a tube of noctua’s next-generation nt-h2 thermal compound that provides even better performance than the award-winning nt-h1, allowing you to achieve the best possible passive cooling results.soldered interface between heatpipes and finswith many heatsinks, the fins are press-fitted to the heatpipes. Due to the different thermal expansion coefficients of copper and aluminium, this fit can loosen over years of thermal cycling, which may lead to reduced performance. By contrast, the nh-p1’s fins are soldered to the heatpipes in order to guarantee a superior thermal interface that doesn’t deteriorate even after many years of usage.

EUR 123.90
1

Noctua NH-D15 G2 HBC -prosessorijäähdytin

Noctua NH-D15 G2 HBC -prosessorijäähdytin

Nh-d15 g2 on noctuan ikonisen nh-d15:n parannettu toinen sukupolvi. Uusimman tekniikan mukaisten, nopeussäätöisten nf-a14x25r g2 pwm -tuulettimien, kahdeksan lämpöputken ja epäsymmetristen lamellipinojen ansiosta, jotka on huolellisesti hienosäädetty toimimaan yhdessä uusien tuulettimien kanssa, se saavuttaa vielä paremman hiljaisen jäähdytystehon kuin palkittu edeltäjänsä. G2-versio on todellinen lippulaivamalli, joka jatkaa alkuperäisen nh-d15:n perintöä laajentamalla ilmajäähdytyksen rajoja ja kilpailemalla monien aio-vesijäähdytysratkaisujen tehokkuuden kanssa. Vahvasti koverille suorittimille optimoitu, erikoistunut high base convexity (hbc) -versio tarjoaa erinomaisen kosketuksen laadun intel lga1700 -prosessoreille, joita käytetään täydellä ilm-paineella tai jotka ovat pysyvästi deformoituneet pitkäaikaisessa käytössä. Edelleen parantuneen suorituskyvyn lisäksi nh-d15 g2 tarjoaa myös paremman yhteensopivuuden offset-rakenteen ansiosta, jonka ansiosta se mahtuu useimpien nykyisten emolevyjen ylimpään pcie x16 -paikkaan. Viimeisenä mutta ei vähäisimpänä g2-versio on päivitetty torx®-pohjaiseen secufirm2+™-monipesäkiinnitysjärjestelmään, jonka mukana toimitetaan nm-sd1-ruuvimeisseli, sekä noctuan ylivoimaiseen nt-h2-lämpömassaan. Lyhyesti sanottuna nh-d15 g2:ta on hiottu entisestään lähes kaikilta osin jäähdytyselementistä ja tuulettimista aina kiinnitykseen, lämpötahnaan ja tarvikepakkaukseen asti. Noctuan luotettavalla 6 vuoden valmistajan takuulla täydennettynä se on uusi ykkösvalinta asiakkaille, jotka vaativat parasta parhaista ilmajäähdytyksistä.erikoisversio hbc (high base convexity).high base convexity (hbc) -versiolla saavutetaan optimaalinen kosketuksen laatu suorittimissa, jotka muuttuvat voimakkaasti koveriksi, kun pistorasia suljetaan ilm:n (independent loading mechanism) paineen vuoksi. Näin ollen se on ihanteellinen intel lga1700 -prosessoreille, jos ei käytetä aluslevyjä tai niin sanottuja kosketuskehyksiä ilm:n paineen vähentämiseksi tai jos prosessori on pysyvästi deformoitunut pitkäaikaisessa käytössä.

EUR 158.90
1

Noctua NH-D15 G2 LBC -prosessorijäähdytin

Noctua NH-D15 G2 LBC -prosessorijäähdytin

Nh-d15 g2 on noctuan ikonisen nh-d15:n parannettu toinen sukupolvi. Uusimman tekniikan mukaisten, nopeussäätöisten nf-a14x25r g2 pwm -tuulettimien, kahdeksan lämpöputken ja epäsymmetristen lamellipinojen ansiosta, jotka on huolellisesti hienosäädetty toimimaan yhdessä uusien tuulettimien kanssa, se saavuttaa vielä paremman hiljaisen jäähdytystehon kuin palkittu edeltäjänsä. G2-versio on todellinen lippulaivamalli, joka jatkaa alkuperäisen nh-d15:n perintöä laajentamalla ilmajäähdytyksen rajoja ja kilpailemalla monien aio-vesijäähdytysratkaisujen tehokkuuden kanssa. Suhteellisen litteille suorittimille optimoitu, erikoistunut low base convexity (lbc) -versio tarjoaa erinomaisen kosketuksen laadun amd:n am5-prosessoreihin, vaikka mukana toimitettua offset-kiinnitysvaihtoehtoa ei käytettäisikään. Paremman suorituskyvyn lisäksi nh-d15 g2 tarjoaa myös paremman yhteensopivuuden offset-rakenteen ansiosta, jonka ansiosta se mahtuu useimpien nykyisten emolevyjen ylimpään pcie x16 -paikkaan. Viimeisenä mutta ei vähäisimpänä g2-versio on päivitetty torx®-pohjaiseen secufirm2+™-monipesäkiinnitysjärjestelmään, jossa on mukana toimitettu nm-sd1-ruuvimeisseli, sekä noctuan ylivoimaiseen nt-h2-lämpömassaan. Lyhyesti sanottuna nh-d15 g2:ta on hiottu entisestään lähes kaikilta osin jäähdytyselementistä ja tuulettimista aina kiinnitykseen, lämpötahnaan ja tarvikepakkaukseen asti. Kruununa noctuan luotettava 6 vuoden valmistajan takuu, se on uusi ykkösvaihtoehto asiakkaille, jotka vaativat ilmajäähdytyksen parhaimmistoa.erikoisversio lbc (low base convexity).low base convexity (lbc) -versiolla saavutetaan optimaalinen kosketuksen laatu suhteellisen tasaisilla suorittimilla. Näin ollen se on ihanteellinen am5-järjestelmään, vaikka offset-kiinnitystä ei käytettäisikään tai jos käyttäjät pyrkivät yhdistämään mahdollisimman alhaiset ccd-lämpötilat mahdollisimman alhaisiin iod-lämpötiloihin. Lbc-versiota suositellaan myös am4-, lga2066- ja lga2011- (-3) (tarvitaan maksuton nm-i20xx-kiinnityssarja), direct die -sovelluksiin sekä suorittimiin, jotka on litteästi kiinnitetty tai varustettu litteillä mukautetuilla lämmönlevittimillä.

EUR 158.90
1

Noctua NA-SAV2 Anti-Vibration -kiinnikkeet

Noctua NA-SAV2 Anti-Vibration -kiinnikkeet

The na-sav2 is a fan accessory set consisting of twenty na-av2 anti-vibration mounts for up to five fans. Replacing standard fan screws, the na-av2 mounts allow for a convenient, quick and vibration-free installation of fans in standard case fan mounting holes. The double-side design makes the na-av2 easier to work with in space restricted environments and thanks to the use of premium grade rubber, these mounts are extra soft and highly tear-proof at the same time. Switching standard fan screws for na-av2 mounts can drastically reduce structure-borne noises and makes this set a perfect complement for noctua’s redux and industrialppc fans!

EUR 10.90
1

Noctua NA-SAVP1 chromax.blue -kiinnitystarvikepakkaus tuulettimille, sininen

Noctua NA-SAVP1 chromax.blue -kiinnitystarvikepakkaus tuulettimille, sininen

The na-savp1 chromax.blue is a fan accessory set consisting of 16 blue na-avp1 anti-vibration pads for up to 2 compatible 120/140mm fans (see compatibility info). Made from extra-soft silicone, the na-avp1 pads minimise the transmission of minute vibrations while maintaining full compatibility with standard fan screws and most other mounting systems. At the same time, the chromax.blue edition is ideal for adding blue accents to noctua’s industrialppc fans in order to colour-coordinate them with individual build themes.the na-avp1 anti-vibration pads are compatible with the noctua fans listed here. Please note that the na-avp1 pads cannot be used with other fans and are not compatible with third-party fans.

EUR 12.90
1

Noctua NV-MPP1.brown Sx4, monikäyttöinen tyynysarja 120 & 140mm tuulettimille, 4 kpl, ruskea

Noctua NV-MPP1.brown Sx4, monikäyttöinen tyynysarja 120 & 140mm tuulettimille, 4 kpl, ruskea

The nv-mpp1 sx4 is a set of four nv-mpp1 multi-purpose anti-vibration pads for noctua 120x25mm and 140x25mm fans (see fan compatibility). When installed in the “stand” position, they are a great, simple solution for putting a fan on any level surface to have it blowing sideways, e.g. In order to provide extra airflow on a desk or towards devices that have ventilation holes on the sides. Installed on the intake side of the fan, the pads can also be utilised to put a fan underneath small devices such as switches, routers or set-top-boxes that have ventilation holes at the bottom side, blowing cool air into the device. This way, the pads can also be used to put fans on top of a/v receivers or other devices that have ventilation holes on top in order to help exhaust hot air. Last but not least, the pads can be installed on the outlet side of the fan in order to position it blowing cool air down onto devices that can benefit from extra airflow from above. In either of these configurations, the nv-mpp1’s soft, heat-proof silicone rubber will efficiently prevent any transmission of vibrations. Thanks to the integrated mounting pins, fixing the pads to compatible noctua fans is a breeze. Optional na-fg1 fan grills can be installed if required.ideal for installing fans underneath deviceswhen installing fans underneath devices, it is crucial that the fan can draw in sufficient air. The nv-mpp1 introduce an offset of 10mm between the fan and the base surface, which allows the fan to draw in plenty of air from the sides in order to achieve optimal cooling performance.anti-vibration designmade from thick, soft silicone rubber and featuring thin ribs on the device side, which create a smaller contact area and therefore further reduce the transmission of vibrations, the nv-mpp1 have been designed to suppress vibrations from ground up.can be combined with nv-mpg1while the set of four nv-mpp1 is ideal for installing fans underneath devices and can also be used to place fans blowing sideways or for exhaust applications, the nv-mpp1 can also be combined with the nv-mpg1-12 gasket in order to create a tighter seal between the fan and the device for more efficient ventilation.easy installationthanks to the integrated mounting pins and lips, installing the nv-mpp1 on compatible noctua 120 or 140mm fans such as the nf-a12x25 or nf-a14 is a breeze: simply press the pads onto the fan until the pins go through the mounting holes and the lip wraps around the corners of the fan. Done!ideal with noctua’s usb-powered 5v fanswhen it comes to installing fans anywhere in your home, office or other environments, the nv-mpp1 are an ideal match for use with noctua’s usb-powered 5v pwm fans. Unlike many cheap usb fans, noctua’s award-winning premium fans are built to last and come with a 6-year manufacturer’s warranty.compatible with fan grillsthe nv-mpp1 have been designed with fan grills in mind: if your application requires extra protection, you can simply add a fan guard such as the na-fg1-12 or na-fg1-14 on top of the nv-mpp1’s in order to make sure that the fan blades cannot be touched. The nv-mpp1 don’t even have to be removed for doing so.

EUR 17.90
1

Noctua NV-MPP1.black Sx4, monikäyttöinen tyynysarja 120 & 140mm tuulettimille, 4 kpl, musta

Noctua NV-MPP1.black Sx4, monikäyttöinen tyynysarja 120 & 140mm tuulettimille, 4 kpl, musta

The nv-mpp1 sx4 is a set of four nv-mpp1 multi-purpose anti-vibration pads for noctua 120x25mm and 140x25mm fans (see fan compatibility). When installed in the “stand” position, they are a great, simple solution for putting a fan on any level surface to have it blowing sideways, e.g. In order to provide extra airflow on a desk or towards devices that have ventilation holes on the sides. Installed on the intake side of the fan, the pads can also be utilised to put a fan underneath small devices such as switches, routers or set-top-boxes that have ventilation holes at the bottom side, blowing cool air into the device. This way, the pads can also be used to put fans on top of a/v receivers or other devices that have ventilation holes on top in order to help exhaust hot air. Last but not least, the pads can be installed on the outlet side of the fan in order to position it blowing cool air down onto devices that can benefit from extra airflow from above. In either of these configurations, the nv-mpp1’s soft, heat-proof silicone rubber will efficiently prevent any transmission of vibrations. Thanks to the integrated mounting pins, fixing the pads to compatible noctua fans is a breeze. Optional na-fg1 fan grills can be installed if required.ideal for installing fans underneath deviceswhen installing fans underneath devices, it is crucial that the fan can draw in sufficient air. The nv-mpp1 introduce an offset of 10mm between the fan and the base surface, which allows the fan to draw in plenty of air from the sides in order to achieve optimal cooling performance.anti-vibration designmade from thick, soft silicone rubber and featuring thin ribs on the device side, which create a smaller contact area and therefore further reduce the transmission of vibrations, the nv-mpp1 have been designed to suppress vibrations from ground up.can be combined with nv-mpg1while the set of four nv-mpp1 is ideal for installing fans underneath devices and can also be used to place fans blowing sideways or for exhaust applications, the nv-mpp1 can also be combined with the nv-mpg1-12 gasket in order to create a tighter seal between the fan and the device for more efficient ventilation.easy installationthanks to the integrated mounting pins and lips, installing the nv-mpp1 on compatible noctua 120 or 140mm fans such as the nf-a12x25 or nf-a14 is a breeze: simply press the pads onto the fan until the pins go through the mounting holes and the lip wraps around the corners of the fan. Done!ideal with noctua’s usb-powered 5v fanswhen it comes to installing fans anywhere in your home, office or other environments, the nv-mpp1 are an ideal match for use with noctua’s usb-powered 5v pwm fans. Unlike many cheap usb fans, noctua’s award-winning premium fans are built to last and come with a 6-year manufacturer’s warranty.compatible with fan grillsthe nv-mpp1 have been designed with fan grills in mind: if your application requires extra protection, you can simply add a fan guard such as the na-fg1-12 or na-fg1-14 on top of the nv-mpp1’s in order to make sure that the fan blades cannot be touched. The nv-mpp1 don’t even have to be removed for doing so.

EUR 16.90
1

Noctua NA-SAVG2 chromax.black, värinää estävä tiivistesarja, 3 kpl

Noctua NA-SAVG2 chromax.black, värinää estävä tiivistesarja, 3 kpl

The na-savg2 chromax.black is a set of three black na-avg2 anti-vibration gaskets for using compatible noctua 140x25mm fans on water cooling radiators or other applications that benefit from a tighter seal with the fan. Made from extra soft yet highly tear-proof silicone rubber, the na-avg2 help to damp minute vibrations and to reduce air loss between the fan and the radiator. As such, they are an ideal accessory for performance enthusiasts who want to squeeze out those extra few percent of cooling efficiency.fine-tuning airflow efficiencywhy get the best fans for your water cooler and then let air escape between the fan and the radiator? Yielding a few tenths of a degree in cpu temperatures may not seem relevant to many, but for performance enthusiasts who relentlessly pursue perfection in optimising their systems, the na-avg2 can be the finishing touch in achieving ultimate efficiency.compatible with most noctua 140x25mm fansthe na-avg2 gaskets are compatible with all current noctua 140x25mm fans, including the award-winning nf-a14 and nf-p14 redux series.set of 3, ideal for 420mm radiatorscontaining 3 na-avg2 gaskets, the na-savg2 set enables customers to equip up to three compatible 140x25mm fans. Perfect for getting the most out of water cooling setups with 280 or 240mm radiators.easy installation, compatible with screws or anti-vibration mountsattaching through the same holes as noctua’s standard na-avp1 anti-vibration pads, installation of the na-avg2 is a breeze. Leaving the fan’s screw holes uncovered, the gaskets are fully compatible with standard fan mounting screws, radiator screws or anti-vibration mounts such as noctua’s na-av1, na-av2, na-av3 or na-av4.

EUR 12.90
1

Noctua NA-SAVG2, värinää estävä tiivistesarja, 3 kpl

Noctua NA-SAVG2, värinää estävä tiivistesarja, 3 kpl

The na-savg2 is a set of three na-avg2 anti-vibration gaskets for using compatible noctua 140x25mm fans on water cooling radiators or other applications that benefit from a tighter seal with the fan. Made from extra soft yet highly tear-proof silicone rubber, the na-avg2 help to damp minute vibrations and to reduce air loss between the fan and the radiator. As such, they are an ideal accessory for performance enthusiasts who want to squeeze out those extra few percent of cooling efficiency.fine-tuning airflow efficiencywhy get the best fans for your water cooler and then let air escape between the fan and the radiator? Yielding a few tenths of a degree in cpu temperatures may not seem relevant to many, but for performance enthusiasts who relentlessly pursue perfection in optimising their systems, the na-avg2 can be the finishing touch in achieving ultimate efficiency.compatible with most noctua 140x25mm fansthe na-avg2 gaskets are compatible with all current noctua 140x25mm fans, including the award-winning nf-a14 and nf-p14 redux series.set of 3, ideal for 420mm radiatorscontaining 3 na-avg2 gaskets, the na-savg2 set enables customers to equip up to three compatible 140x25mm fans. Perfect for getting the most out of water cooling setups with 280 or 240mm radiators.easy installation, compatible with screws or anti-vibration mountsattaching through the same holes as noctua’s standard na-avp1 anti-vibration pads, installation of the na-avg2 is a breeze. Leaving the fan’s screw holes uncovered, the gaskets are fully compatible with standard fan mounting screws, radiator screws or anti-vibration mounts such as noctua’s na-av1, na-av2, na-av3 or na-av4.

EUR 12.90
1

Noctua NF-A6x25 FLX, 60x25mm -kotelotuuletin

Noctua NF-A6x25 FLX, 60x25mm -kotelotuuletin

Featuring advanced aerodynamic design measures such as flow acceleration channels and noctua’s aao frame, the nf-a6x25 flx is a highly optimised, premium quality quiet fan in 60x25mm size. Smooth commutation drive technology and noctua’s reference class sso2 bearings guarantee superb running smoothness and excellent long-term stability. Topped off with modular cabling, low-noise adaptors and 6 years manufacturer’s warranty, the nf-a6x25 is a premium choice for the highest demands.flow acceleration channelsthe nf-a6x25 impeller features suction side flow acceleration channels. By speeding up the airflow at the crucial outer blade regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise. Buttonreduced motor hub sizethanks to its streamlined, compact motor design, the nf-a6x25’s motor hub is smaller than with conventional 6cm fans. This allows for more blade surface area and thus contributes to the nf-a6x25’s superior airflow and pressure performance.aao framenoctua’s aao (advanced acoustic optimisation) frames feature integrated anti-vibration pads as well as noctua’s proprietary stepped inlet design and inner surface microstructures, both of which further refine the fan’s performance/noise efficiency. Buttonstepped inlet designnoctua’s stepped inlet design adds turbulence to the influx in order to facilitate the transition from laminar flow to turbulent flow, which reduces tonal intake noise, improves flow attachment and increases suction capacity, especially in space restricted environments. Buttoninner surface microstructureswith the tips of the fan blades ploughing through the boundary layer created by the inner surface microstructures, flow separation from the suction side of the blades is significantly suppressed, which results in reduced blade passing noise and improved airflow and pressure efficiency. Buttonintegrated anti-vibration padsintegrated anti-vibration pads made from extra-soft silicone minimise the transmission of minute vibrations while maintaining full compatibility with all standard mounting systems and fan clips used on heatsinks.smooth commutation drive 2the latest version of noctua’s advanced smooth commutation drive system ensures superb running smoothness by eliminating torque variations and switching noises. This makes the nf-a6x25 remarkably quiet even at very close distance. Buttonsso2 bearingthe nf-a6x25 features the further optimised second generation of noctua’s renowned, time-tested sso bearing. With sso2, the rear magnet is placed closer to the axis to provide even better stabilisation, precision and durability. Button3 speed settings for full flexibilityproviding 3000, 2400 and 1600 rpm speed settings via the supplied low-noise and ultra-low-noise adapters, the nf-a6x25 flx (flexibility) can be fine-tuned for superior airflow or maximum quietness.extensive cabling optionsthe fan’s short 20cm primary cable minimises cable clutter in typical applications while the supplied 30cm extension provides extended reach when necessary. Both cables are fully sleeved and the supplied 3:4 pin adaptor allows to connect the fan directly to the power supply.

EUR 17.90
2

Noctua NF-A8 FLX, 80mm -kotelotuuletin

Noctua NF-A8 FLX, 80mm -kotelotuuletin

The nf-a8 is a highly optimised, premium quality quiet 80mm fan. Featuring noctua’s aao (advanced acoustic optimisation) frame as well as sophisticated aerodynamic design measures such as flow acceleration channels, the nf-a8 further improves the renowned quiet cooling performance of the award-winning nf-r8. The flx version provides 2000/1650/1200rpm speed settings via the supplied low-noise adaptors in order to provide full flexibility in fine-tuning the fan for maximum ventilation performance or near-silent operation. Its superb running smoothness, reference-class sso2 bearing and noctua’s trusted premium quality make it an elite choice for the highest demands.succeeding the award-winning nf-r8noctua’s nf-r8 fan has become a default-choice among pc enthusiasts looking for a premium quality quiet 80mm fan. Thanks to its thoroughgoing aerodynamic optimisations, the nf-a8 provides higher static pressure and an even better airflow/noise ratio than its much acclaimed predecessor.flow acceleration channelsthe nf-a8 impeller features suction side flow acceleration channels. By speeding up the airflow at the crucial outer blade regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise.aao framenoctua’s aao (advanced acoustic optimisation) frames feature integrated anti-vibration pads as well as noctua’s proprietary stepped inlet design and inner surface microstructures, both of which further refine the fan’s performance/noise efficiency.stepped inlet designnoctua’s stepped inlet design adds turbulence to the influx in order to facilitate the transition from laminar flow to turbulent flow, which reduces tonal intake noise, improves flow attachment and increases suction capacity, especially in space restricted environments.inner surface microstructureswith the tips of the fan blades ploughing through the boundary layer created by the inner surface microstructures, flow separation from the suction side of the blades is significantly suppressed, which results in reduced blade passing noise and improved airflow and pressure efficiency.integrated anti-vibration padsintegrated anti-vibration pads made from extra-soft silicone minimise the transmission of minute vibrations while maintaining full compatibility with all standard screws and other mounting systems.sso2 bearingthe nf-a8 features the further optimised second generation of noctua’s renowned, time-tested sso bearing. With sso2, the rear magnet is placed closer to the axis to provide even better stabilisation, precision and durability.smooth commutation drive 2the latest version of noctua’s advanced smooth commutation drive system ensures superb running smoothness by eliminating torque variations and switching noises. This makes the nf-a8 remarkably quiet even at very close distance.3 speed settings for full flexibilityproviding 2000, 1650 and 1200 rpm speed settings via the supplied low-noise and ultra-low-noise adapters, the nf-a8 flx (flexibility) can be fine-tuned for superior airflow or maximum quietness.extensive cabling optionsthe fan’s short 20cm primary cable minimises cable clutter in typical applications while the supplied 30cm extension provides extended reach when necessary. Both cables are fully sleeved.

EUR 19.90
1

Noctua NF-A9 FLX, 92mm -kotelotuuletin

Noctua NF-A9 FLX, 92mm -kotelotuuletin

The nf-a9 is a highly optimised, premium quality quiet 92mm fan. Featuring noctua’s aao (advanced acoustic optimisation) frame as well as sophisticated aerodynamic design measures such as flow acceleration channels, the nf-a9 further improves the renowned quiet cooling performance of the award-winning nf-b9. The flx version provides 1600/1250/1050rpm speed settings via the supplied low-noise adaptors in order to provide full flexibility in fine-tuning the fan for maximum ventilation performance or near-silent operation. Its superb running smoothness, reference-class sso2 bearing and noctua’s trusted premium quality make it an elite choice for the highest demands.nf-a9 succeeding the award-winning nf-b9noctua’s nf-b9 fan has become a default-choice among pc enthusiasts looking for a premium quality quiet 92mm fan. Thanks to its thoroughgoing aerodynamic optimisations, the nf-a9 provides higher static pressure and an even better airflow/noise ratio than its much acclaimed predecessor.flow acceleration channelsthe nf-a9 impeller features suction side flow acceleration channels. By speeding up the airflow at the crucial outer blade regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise. Buttonaao framenoctua’s aao (advanced acoustic optimisation) frames feature integrated anti-vibration pads as well as noctua’s proprietary stepped inlet design and inner surface microstructures, both of which further refine the fan’s performance/noise efficiency. Buttonstepped inlet designnoctua’s stepped inlet design adds turbulence to the influx in order to facilitate the transition from laminar flow to turbulent flow, which reduces tonal intake noise, improves flow attachment and increases suction capacity, especially in space restricted environments. Buttoninner surface microstructureswith the tips of the fan blades ploughing through the boundary layer created by the inner surface microstructures, flow separation from the suction side of the blades is significantly suppressed, which results in reduced blade passing noise and improved airflow and pressure efficiency. Buttonintegrated anti-vibration padsintegrated anti-vibration pads made from extra-soft silicone minimise the transmission of minute vibrations while maintaining full compatibility with all standard screws and other mounting systems.sso2 bearingthe nf-a9 features the further optimised second generation of noctua’s renowned, time-tested sso bearing. With sso2, the rear magnet is placed closer to the axis to provide even better stabilisation, precision and durability. Buttonsmooth commutation drive 2the latest version of noctua’s advanced smooth commutation drive system ensures superb running smoothness by eliminating torque variations and switching noises. This makes the nf-a9 remarkably quiet even at very close distance. Button3 speed settings for full flexibilityproviding 1600, 1250 and 1050 rpm speed settings via the supplied low-noise and ultra-low-noise adapters, the nf-a9 flx (flexibility) can be fine-tuned for superior airflow or maximum quietness.extensive cabling optionsthe fan’s short 20cm primary cable minimises cable clutter in typical applications while the supplied 30cm extension provides extended reach when necessary. Both cables are fully sleeved.6 years manufacturer’s warrantynoctua fans are renowned for their impeccable quality and outstanding longevity. Like all noctua fans, the nf-a9 features an mtbf of more than 150.000 hours rating and comes with a full 6 years manufacturer’s warranty.

EUR 20.90
1

Noctua NF-A9 PWM, 92mm -kotelotuuletin

Noctua NF-A9 PWM, 92mm -kotelotuuletin

The nf-a9 is a highly optimised, premium quality quiet 92mm fan. Featuring noctua’s aao (advanced acoustic optimisation) frame as well as sophisticated aerodynamic design measures such as flow acceleration channels, the nf-a9 further improves the renowned quiet cooling performance of the award-winning nf-b9. The pwm version sports noctua’s custom designed ne-fd1 ic for fully automatic speed control via 4-pin fan headers and comes with a low-noise-adaptor to reduce the maximum speed during pwm control from 2000 to 1550rpm. Its superb running smoothness, reference-class sso2 bearing and noctua’s trusted premium quality make it an elite choice for the highest demands.succeeding the award-winning nf-b9noctua’s nf-b9 fan has become a default-choice among pc enthusiasts looking for a premium quality quiet 92mm fan. Thanks to its thoroughgoing aerodynamic optimisations, the nf-a9 provides higher static pressure and an even better airflow/noise ratio than its much acclaimed predecessor.flow acceleration channelsthe nf-a9 impeller features suction side flow acceleration channels. By speeding up the airflow at the crucial outer blade regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise.aao framenoctua’s aao (advanced acoustic optimisation) frames feature integrated anti-vibration pads as well as noctua’s proprietary stepped inlet design and inner surface microstructures, both of which further refine the fan’s performance/noise efficiency.stepped inlet designnoctua’s stepped inlet design adds turbulence to the influx in order to facilitate the transition from laminar flow to turbulent flow, which reduces tonal intake noise, improves flow attachment and increases suction capacity, especially in space restricted environments.inner surface microstructureswith the tips of the fan blades ploughing through the boundary layer created by the inner surface microstructures, flow separation from the suction side of the blades is significantly suppressed, which results in reduced blade passing noise and improved airflow and pressure efficiency.integrated anti-vibration padsintegrated anti-vibration pads made from extra-soft silicone minimise the transmission of minute vibrations while maintaining full compatibility with all standard screws and other mounting systems.sso2 bearingthe nf-a9 features the further optimised second generation of noctua’s renowned, time-tested sso bearing. With sso2, the rear magnet is placed closer to the axis to provide even better stabilisation, precision and durability.custom designed pwm ic with scdsupporting fully automatic pwm speed control, the nf-a9 pwm uses noctua’s novel, custom designed ne-fd1 pwm ic that integrates smooth commutation drive (scd) technology. By providing smoother torque impulses, scd suppresses pwm switching noises and thus makes the fan quieter at low speeds.low-noise adaptorthe nf-a9 pwm is supplied with a low-noise adaptor (l.n.a.) that reduces the maximum fan speed from 2000 to 1550rpm. The l.n.a can be used either to run the fan at a fixed speed of 1550rpm or to cap the maximum speed when using automatic pwm control.extensive cabling optionsthe fan’s short 20cm primary cable minimises cable clutter in typical applications while the supplied 30cm extension provides extended reach when necessary. Both cables are fully sleeved and a 4-pin y-cable allows to connect a second nf-a9 pwm fan to the same pwm fan header for automatic control.

EUR 20.90
2

Noctua NF-A9x14 PWM, 92mm -kotelotuuletin

Noctua NF-A9x14 PWM, 92mm -kotelotuuletin

Featuring noctua’s aao frame and sophisticated aerodynamic design measures such as flow acceleration channels, the nf-a9x14 is a highly optimised, premium quality quiet fan in 92x14mm size. Due to its thickness of only 14mm, the nf-a9x14 is a perfect match for low profile cpu coolers and all other applications that require slimmer fans. Noctua’s custom-designed pwm ic for fully automatic speed control and reference class sso2 bearings guarantee superb running smoothness and excellent long-term stability. Topped off with modular cabling, a low-noise adaptor and 6 years manufacturer’s warranty, the nf-a9x14 is a premium choice for the highest demands.14mm low profile designmeasuring only 14mm in thickness, the nf-a9x14 is much slimmer than standard 92x25mm fans. This makes it ideal for all applications where standard fans would take up too much space, such as low profile cpu coolers in htpc builds or server environments.flow acceleration channelsthe nf-a9x14 impeller features suction side flow acceleration channels. By speeding up the airflow at the crucial outer blade regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise. Buttonaao framenoctua’s aao (advanced acoustic optimisation) frames feature integrated anti-vibration pads as well as noctua’s proprietary stepped inlet design and inner surface microstructures, both of which further refine the fan’s performance/noise efficiency. Buttonstepped inlet designnoctua’s stepped inlet design adds turbulence to the influx in order to facilitate the transition from laminar flow to turbulent flow, which reduces tonal intake noise, improves flow attachment and increases suction capacity, especially in space restricted environments. Buttoninner surface microstructureswith the tips of the fan blades ploughing through the boundary layer created by the inner surface microstructures, flow separation from the suction side of the blades is significantly suppressed, which results in reduced blade passing noise and improved airflow and pressure efficiency. Buttonintegrated anti-vibration padsintegrated anti-vibration pads made from extra-soft silicone minimise the transmission of minute vibrations while maintaining full compatibility with all standard mounting systems and fan clips used on heatsinks.sso2 bearingthe nf-a9x14 features the further optimised second generation of noctua’s renowned, time-tested sso bearing. With sso2, the rear magnet is placed closer to the axis to provide even better stabilisation, precision and durability. Buttoncustom designed pwm ic with scdsupporting fully automatic pwm speed control, the nf-a9x14 uses noctua’s novel, custom designed ne-fd1 pwm ic that integrates smooth commutation drive (scd) technology. By providing smoother torque impulses, scd suppresses pwm switching noises and thus makes the fan quieter at lower speeds. Buttonlow-noise adaptorthe nf-a9x14 is supplied with a low-noise adaptor (l.n.a.) that reduces the maximum fan speed from 2200 to 1700rpm. The l.n.a can be used either to run the fan at a fixed speed of 1200rpm or to cap the maximum speed when using automatic pwm control.extensive cabling optionsthe fan’s short 20cm primary cable minimises cable clutter in typical applications while the supplied 30cm extension provides extended reach when necessary. Both cables are fully sleeved and a 4-pin y-cable allows to connect a second nf-a9x14 fan to the same pwm fan header for automatic control.

EUR 19.90
2

Noctua NF-A8 FLX, 80mm -kotelotuuletin

Noctua NF-A8 FLX, 80mm -kotelotuuletin

The nf-a8 is a highly optimised, premium quality quiet 80mm fan. Featuring noctua’s aao (advanced acoustic optimisation) frame as well as sophisticated aerodynamic design measures such as flow acceleration channels, the nf-a8 further improves the renowned quiet cooling performance of the award-winning nf-r8. The flx version provides 2000/1650/1200rpm speed settings via the supplied low-noise adaptors in order to provide full flexibility in fine-tuning the fan for maximum ventilation performance or near-silent operation. Its superb running smoothness, reference-class sso2 bearing and noctua’s trusted premium quality make it an elite choice for the highest demands.succeeding the award-winning nf-r8noctua's nf-r8 fan has become a default-choice among pc enthusiasts looking for a premium quality quiet 80mm fan. Thanks to its thoroughgoing aerodynamic optimisations, the nf-a8 provides higher static pressure and an even better airflow/noise ratio than its much acclaimed predecessor.flow acceleration channelsthe nf-a8 impeller features suction side flow acceleration channels. By speeding up the airflow at the crucial outer blade regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise.aao framenoctua's aao (advanced acoustic optimisation) frames feature integrated anti-vibration pads as well as noctua's proprietary stepped inlet design and inner surface microstructures, both of which further refine the fan's performance/noise efficiency.stepped inlet designnoctua's stepped inlet design adds turbulence to the influx in order to facilitate the transition from laminar flow to turbulent flow, which reduces tonal intake noise, improves flow attachment and increases suction capacity, especially in space-restricted environments.inner surface microstructureswith the tips of the fan blades ploughing through the boundary layer created by the inner surface microstructures, flow separation from the suction side of the blades is significantly suppressed, which results in reduced blade passing noise and improved airflow and pressure efficiency.integrated anti-vibration padsintegrated anti-vibration pads made from extra-soft silicone minimise the transmission of minute vibrations while maintaining full compatibility with all standard screws and other mounting systems.sso2 bearingthe nf-a8 features the further optimised second generation of noctua's renowned, time-tested sso bearing. With sso2, the rear magnet is placed closer to the axis to provide even better stabilisation, precision and durability.smooth commutation drive 2the latest version of noctua's advanced smooth commutation drive system ensures superb running smoothness by eliminating torque variations and switching noises. This makes the nf-a8 remarkably quiet even at very close distances.3 speed settings for full flexibilityproviding 2000, 1650 and 1200 rpm speed settings via the supplied low-noise and ultra-low-noise adapters, the nf-a8 flx (flexibility) can be fine-tuned for superior airflow or maximum quietness.extensive cabling optionsthe fan's short 20cm primary cable minimises cable clutter in typical applications while the supplied 30cm extension provides extended reach when necessary. Both cables are fully sleeved.6-year manufacturer’s warrantynoctua fans are renowned for their impeccable quality and outstanding longevity. Like all noctua fans, the nf-a8 features an mttf of more than 150.000 hours rating and comes with a full 6-year manufacturer’s warranty.

EUR 19.90
1