Pricemate

Mikrotik S-RJ01 RJ45 SFP 10-100-1000 copper module

S-rj01 is rj45 sfp 10/100/1000m copper module, compatible with most gigabit sfp ports available on various networking devices.- up to 1.25 gb/s bi-directional data links- 100m transmission over unshielded- compliant with ieee std 802.3tm-2002- compliant with sfp msa- rohscompliance- access to physical layer ic via 2-wire serial bus- rj-45 connector- hot pluggable sfp footprint- +3.3v single power supply- extended case temperature range (0°c to +85°c)

EUR 45.90

1

MikroTik RB4011IGS+5HACQ2HND-IN 10-Portars Gigabit Router, Dual-Band W

Rb4011 series - amazingly powerful routers with ten gigabit ports, sfp+ 10gbps interface and ipsec hardware acceleration for a great price!the rb4011 uses a quad core cortex a15 cpu, same as in our carrier grade rb1100ahx4 unit. The unit is equipped with 1gb of ram, can provide poe output on port #10 and comes with a compact and professional looking solid metal enclosure in matte black.rb4011igs+5hacq2hnd-in (wifi model) is dual band, four chain unit with a supported data rate of up to 1733 mbps in 5ghz. For legacy devices, the unit also has a dual chain 2ghz wireless card installed in minipci-e slot.we have two versions available.rb4011igs+5hacq2hnd-in-us (usa) is factory locked for 2412-2462mhz, 5170-5250mhz and 5725-5835mhz frequencies. This lock can not be removed.rb4011igs+5hacq2hnd-in (international) supports 2412-2484mhz and 5150mhz-5875mhz range (specific frequency range can be limited by country regulations).

EUR 331.90

1

Mikrotik RB952Ui-5AC2ND hAPaclite 5xLAN dualband 3x3 2.4 1x1 5GHz

The hap ac lite is a dual-concurrent access point, that provides wifi coverage for 2.4ghz and 5ghz frequencies at the same time.unit is equipped with a 650mhz cpu, 64mb ram, five 10/100mbps ethernet ports (poe output on port #5), dual-chain 802.11b/g/n 2.4ghz wireless, single chain 802.11ac 5ghz wireless, usb port for 3g/4g modem and a routeros l4 license.

EUR 52.90

1

Mikrotik RBPOE Passive PoE adapter DC injector

Low-cost passive poe base unit for powering passive poe devices over ethernet. Simply connect your power source to the injector, and then use an ethernet cable to connect the injector to the routerboard device. Helps reducing number of wires that lead up the tower, and in other situations. For using with routerboards that support 10-28v poe powering, input needs to be at least 18v to accomodate any losses in cables.

EUR 5.90

1

Mikrotik hAP ac² Dual-Band -WiFi-reititin

The hap ac² is a dual-concurrent access point, that provides wifi coverage for 2.4 ghz and 5 ghz frequencies at the same time. Five 10/100/1000 ethernet ports provide gigabit connections for your wired devices, usb can be used for external storage or 4g/lte modem, and device supports ipsec hardware acceleration.new design universal case allows unit to be positioned either horizontally (desktop) or vertically (tower case). Wall anchored mounting kit is provided.

EUR 69.90

1

Mikrotik RBSXTSQG-5ACD SXTSQ 5AC 16dBi 5GHz 802.11ac 256MB L3

The sxtsq 5 ac is a compact and lightweight outdoor 5ghz 802.11ac wireless device with an integrated antenna, perfect for point-to-point links or as a cpe unit. The device includes one 10/100/1000 mbit ethernet port to fully utilize speeds that 802.11ac protocol provides.the sxtsq 5 ac retains a 16 dbi antenna like the sxt 5 ac, our previous model, yet the antenna design has been improved and the physical size has been dramatically reduced - the sxtsq is two times thinner.

EUR 89.90

1

Mikrotik RB4011IGS+RM 1.4GHz x4 1GB RAM 10xGE 1xSFP+ RouterOS L5

Rb4011 series - amazingly powerful routers with ten gigabit ports, sfp+ 10gbps interface and ipsec hardware acceleration for a great price!the rb4011 uses a quad core cortex a15 cpu, same as in our carrier grade rb1100ahx4 unit. The unit is equipped with 1gb of ram, can provide poe output on port #10 and comes with a compact and professional looking solid metal enclosure in matte black.rb4011igs+rm (ethernet model) includes two rackmount ears that will securely fasten the unit in a standard 1u rack space.

EUR 261.90

1

Mikrotik CSS326-24G-2S+RM 24xgiga ports 2xSFP+ rackmount

Swos powered 24 port gigabit ethernet switch with two sfp+ ports, wire speed connectivity with several new switching features.the device is powered by a marvell dx switch chip. The device is running an operating system designed specifically for mikrotik switch products - swos. Swos is configurable from your web browser. It gives you all the basic functionality for a managed switch, plus more: allows to manage port-to-port forwarding, apply mac filter, configure vlans, mirror traffic, apply bandwidth limitation and even adjust some mac and ip header fields. Sfp cage supports both 1.25 gb sfp and 10 gb sfp+ modules.

EUR 156.90

1

MIKROTIK CRS310-1G-5S-4S+IN 1x ETH 5x SFP 4x SFP+ L5

10 gigabit fibre connectivity way over a 100 meters – for small offices or isps. Hardware offloaded vlan-filtering and even some l3 routing on a budget!this switch is an indoor variation of the prominent netfiber 9 switch – used by many small and medium isps for reliable 10 gigabit fibre connections stretching over a 100 meters. With five 1g sfp ports, four 10g sfp+ ports, and an additional gigabit ethernet port, this is the perfect upgrade for existing crs212 setups. You’re getting the modern arm v7 cpu, 256 mb of ram, and better cooling. The new marvell switch-chips bring phenomenal performance to the table!the gigabit ethernet port has a direct connection to the switch chip – so you can enjoy full gigabit speed there. And it supports poe-in, giving you an additional powering option in tricky spots.you can mount this switch in a standard 1u rack to keep everything organized. And it has all the power you would expect from a rackmount device: crs310 supports hardware offloaded vlan- filtering. And even some hardware offloaded layer-3 routing.crs310-1g-5s-4s+in is a fantastic tool for anyone working with indoor connections over 100 meters while keeping data loss and ping low. Optical fiber can be a great alternative to copper if you are worried about electromagnetic interference, tampering or eavesdropping.

EUR 245.90

1

MIKROTIK RouterBOARD 450Gx4 (RouterOS L5)

The rb450gx4 is an ethernet router with five gigabit ethernet ports, a serial port, 512 mb nand memory and a microsd card slot. In addition, it supports full 10 v - 57 v input by two power jacks or poe (802.3af/ at or passive poe) and can provide poe output for ethernet port #5.it is powered by mikrotik routeros. It comes without an enclosure, you are free to use it in your own. The device form factor is identical to our previous rb850 and rb450 series, so you can even use the same enclosures.the device is powered by a quad core arm cpu, has 1 gb of ram and supports hardware ipsec encryption. The device is powered by routeros - the operating system, which will turn this powerful system into a highly sophisticated router, firewall or bandwidth manager.

EUR 119.90

1

Mikrotik RBGPOE-CON-HP 48 to 24V Gigabit PoE Converter

This device lets you use any 48v poe source (including passive poe, telecom poe, 802.3af and 802.3at) to power routerboard devices. Simply plug any 48v poe powered ethernet cable into one port, and any 8-30v capable routerboard device into the other. This device is capable to provide high power output - up to 24w (up to 1a at 24v). You can power it with virtually any 42-57v poe solutions available on market today (passive, telecom, 802.3af and 802.3at poe plus supported) the device is a rugged metallic design, with high quality components and integrated heatsink design. The case also has mounting holes so you can attach it to a wall. Ethernet shield pins are inside the ethernet connectors, so that shielded ethernet can be used, to ground either at the converter itself, or at the devices at both ends. Supports 10/100/1000mbps ethernet

EUR 34.90

1

Mikrotik CRS326-24G-2S+RM 24xgiga ports 2xSFP+ rackmount

Swos/routeros powered 24 port gigabit ethernet switch with two sfp+ ports, wire speed connectivity with several new switching features!it has “dual boot” feature that allows you to choose which operating system you prefer to use, routeros or swos. If you prefer to have a simplified switch only os with more switch specific features, use swos. If you are used to winbox and would like the ability to use routing and other layer 3 features on some ports in your crs, boot and use routeros. You can select the desired operating system from routeros, from swos or from the routerboot loader settings.it gives you all the basic functionality for a managed switch, plus more: allows to manage port-to-port forwarding, apply mac filter, configure vlans, mirror traffic, apply bandwidth limitation and even adjust some mac and ip header fields. Sfp cage supports both 1.25 gb sfp and 10 gb sfp+ modules.

EUR 257.90

1

Mikrotik CCR2004-16G-2S+16xGE 2xSFP+ 4GB RAM L6

Like the other models in ccr2004 series, this ccr also features the annapurna labs alpine v2 cpu with 4x 64-bit armv8-a cortex-a57 cores running at 1,7ghz. But here’s the difference. This powerful router crushes all previous ccr models in single-core performance, and that is the most important aspect when it comes to heavy operations based on per-connection processing. Like queues, for example.but that’s not all! It also has the best single-core performance per watt and best overall performance per watt among all the ccr devices. Better for the planet, better for the bills, it’s a win-win!the new router has 18 wired ports, including 16x gigabit ethernet ports and two 10g sfp+ cages. It also has a rj-45 console port on the front panel. Like all ccr devices, it comes in a classic white 1u rackmount case. Built-in dual redundant power supplies are included, so you have one less thing to worry about. And, of course, there is active cooling to keep things nice and cool. Each group of 8 gigabit ethernet ports is connected to a separate marvell amethyst family switch-chip. Each switch chip has a 10 gbps full-duplex line connected to the cpu. The same goes for each sfp+ cage - a separate 10 gbps full-duplex line. Boards come with 4gb of ddr4 ram and 128mb of nand storage.so as you can see - no bottlenecks. As long as the cpu can handle the processing, all ports can reach wire speed. And this cpu is a beast that can handle a lot. If we look at the performance, you can see that it is trading blows with our ccr1009. Even surpassing it in cpu-heavy configurations! And if that wasn’t enough – it can even reach the performance of ccr1016.the best part? This brand new ccr is among the most affordable options out there - not only within the ccr series, but on the market in general.one of the most common ways to use this device would be: gigabit ethernet ports for the internal network; sfp+ ports for downlink and uplink. The perfect all-in-one solution for small and medium-sized businesses. Easy and efficient.with the new ccr2004, you can take your office network to the next level. Without breaking the bank.

EUR 613.90

1

Mikrotik RB5009UG+S+IN 7xGE 1xSFP+ 1GB RAM L5

Double the usual performance: we took your feedback from the mikrotik user meetings to create the perfect home lab router: compact, powerful, with multiple powering options and efficient cooling.rb5009 has it all, and even more!the board features 9 wired ports and a full-sized usb 3.0. Seven of the ports are gigabit ethernet, another one is 2.5 gigabit ethernet, and the last one is a 10g sfp+ cage. All the ports are connected to a powerful marvell amethyst family switch-chip with a 10 gbps full-duplex line leading to the marvell armada quad-core armv8 1.4 ghz cpu. Both cpu and the switch-chip are located on the bottom of the board – so the case acts as a massive heat-sink!rb5009ug+s+in can be powered in 3 different ways:a) poe-in from ethernet port #1b) dc jackc) 2-pin terminal on the sideboards come with 1gb of ddr4 ram and 1gb nand storage. This combination of ports and components, compared to our other products in a similar form factor, provides almost double the performance in configurations with heavy cpu loads.with a simple set of mounting accessories, you can mount four of these routers in a single 1u rackmount space! No more server-room-tetris, just pure productivity.

EUR 263.90

1

Mikrotik CRS328-24P-4S+RM 24xGE w POE 4xSFP+ 500W rackm

Crs328-24p-4s+rm is a 28 independent port switch, it has 24 gigabit ethernet ports, which offer different power output options: passive poe, low voltage poe, 802.3af/at (type 1 “poe” / type 2 “poe+”) with auto-sensing. Poe-out is passed over mode b pins (4,5+)(7,8-). The four sfp+ ports provide up to 10 gbps connectivity options via either optical fiber or ethernet modules (not included).crs328-24p-4s+rm comes in a 1u rackmount case with 100-240 v ac 500 w power supply built-in. The device consumes up to 44 w leaving guaranteed 450 w (3x150 w per every 8 ethernet ports) to power your poe devices. Each port can provide up to 30 w of power with any power output option you choose.the device has a “dual boot” feature that allows you to choose between two operating systems - routeros or swos. If you prefer to have a simplified operating system with only switch specific features, use swos. If you would like the ability to use routing and other layer 3 features in your crs, use routeros. You can select the desired operating system from routeros, from swos or from the routerboot loader settings. All the feature set comes with disruptive price, providing best price/performance on the market.

EUR 651.90

1

Mikrotik RB5009UPr+S+IN with RouterOS L5 license indoor case

It’s all about the power...this version of the rb5009 has all the bells and whistles of the previous model: gigabit ethernet, 2.5 gigabit ethernet, and a 10 gigabit sfp+ cage for fiber connectivity. It has the speed, the power, and the durability. But this time, we have added poe-in & poe-out on all eight ethernet ports. Combined with the 2-pin connector and the dc jack, you’re getting 10 separate ways of powering. Dual redundant power supplies would usually take your uninterrupted uptime to the next level. Rb5009upr+s+in takes it one step above that!all power options support a wide voltage range of 24 – 57 v. However, you can not mix the voltages. If you’re using poe-out to power other devices, the board will choose the source with the highest voltage (dc jack or the 2-pin connector) to power those.each poe-out port can supply up to 25w of power. All the ports combined are limited to 130w, which should be enough for most setups. You can specify maximum available power from your power sources manually, if necessary. When it comes to poe-out features, the new rb5009 can trade blows with our legendary poe switches: crs354 & crs328. In the smallest possible form-factor and for the best price on the market!protect your uptime, protect your tranquility!so what exactly happens if there is a problem with one of your power sources? Here’s a quick example: you have 24v on the dc jack, 48v on the 2-pin connector, and 57v on the poe-in. The board itself gets powered by the highest voltage input – the poe-in. If there’s a problem, rb5009 will fall back to the second highest voltage - the 2-pin connector. And if that fails – there’s the 24v option on the dc jack.what about the poe-out devices? Once again – the highest voltage wins. Poe-out devices will draw power from the 48v source on the 2-pin connector. If that fails – the 24v on the dc jack come into play. The board will always reserve 20 watts to power itself. If there is not enough power for all the poe-out ports, it will start disabling the ones with the lowest priority. You can set the port priority manually.this tiny form-factor shines anywhere: from confined research facilities and offices to huge corporate server rooms. And don’t forget that you can mount four of these routers in a single 1u rackmount spacewith the new rb5009, we want to empower all the small and medium isps that are always on the lookout for the most cost-effective and robust solutions. It is a perfect addition to our previous gpen devices – a line of products designed to replace the expensive gpon solutions.with so many powering options and a durable metallic case, the new rb5009 redefines affordable reliability.

EUR 377.90

1

Mærke

Butik

Pris (EUR)