3.260 resultater (0,33126 sekunder)

Vis alle filtre

Mærke

Butik

Pris (EUR)

Vis alle

Nulstil filter

Produkter
Fra
Butikker

Brodit Faststrøms Aktiv Holder til M3 Mobile M3 Black - 513780

Brodit Faststrøms Aktiv Holder til M3 Mobile M3 Black - 513780

Brodit faststrøms Aktiv holder til M3 Mobile M3 Black Model: 513780 EAN: 7320285137806 Med kugleled og 2A opladning. Hurtig opladning med faststrøms montering som samtidig giver en pæn installation uden hængende ledninger. Med en Brodit faststrøms holder til din M3 Moblie M3 Black monteret sikkert på en Brodit proclaim er den altid inden for rækkevidde og opladet klar til brug. Holderen er monteret på et kugleled så du let kan justerer skærmen iforhold til lysindfald. Installer med en 2A sikring inde bag instrumentbordet. Professionel installation anbefales. 12/24 Volt. Opladnings specifikationer: Input voltage: DC/10-30V Charging voltage: DC/4.75-5.3V Output current(Typ): 2.0A Passer til M3 Mobile M3 Black

DKK 784.00
1

Brodit Passiv Holder M3 Mobile M3 Black - 511780

Brodit Passiv Holder M3 Mobile M3 Black - 511780

Brodit Passiv holder med Kugleled til M3 Mobile M3 Black Model: 511780 EAN: 7320285117808 Til enheder uden Bumper/beskyttelsescover Holderen til M3 Black er ekstra slidstærk og beregnet til at modstå arbejdsmiljø i professional brug. Med din hårdføre PDA i en passiv holder monteret på dit instrument bord er den altid lige inden for rækkevidde. Holderen er monteret på et kugleled så du kan justere i forhold til lysindfald ligesom den er åben i bunden sådan så du let kan tilslutte et opladerkabel.

DKK 266.00
1

Brodit Aktiv holder med cigarlader og spiralledning til M3 Mobile M3 Black - 512780

Brodit Aktiv holder med cigarlader og spiralledning til M3 Mobile M3 Black - 512780

Brodit Aktiv holder med cigaroplader og spiralledning til M3 Mobile M3 Black Model: 512780 EAN: 7320285127807 Med en aktiv holder oplades enhedens batteri så snart den sidder i holderen. Enheden kobles til opladeren så snart den placeres i holderen. Holderen er placeret på et kugleled så du let kan justere i forhold til lysindfald. Kobles til strøm via bilens cigartænder stik. 12/24 Volt. Holderen kan let monteres på en Brodit proclip med de medfølgende skruer. Opladnings specifikationer: Input voltage: DC/10-24V Charging voltage: DC/4.6-5.3V Output current(Typ): 3.0A Passer til M3 Mobile M3 Black

DKK 784.00
1

Brodit Aktiv Holder med cigaradaptor til M3 Mobile SM20-series, M3 Mobile SM15-series og M3 Mobile SM10-series - 712036

Brodit Aktiv Holder med cigaradaptor til M3 Mobile SM20-series, M3 Mobile SM15-series og M3 Mobile SM10-series - 712036

#html-body [data-pb-style=CF93M76]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Active holder with cig-plugWith tilt swivel. For device with bumper. Extra robust holder with top support.Extra robust holders with an extra firm fit and top support. For professional every day use in rough environments. For use with device with bumper. Connects to the vehicle's cigarette lighter socket, 12/24 Volt.The holders are equipped with a tilt swivel so you can easily adjust the angle of your device for better viewing. Tilts 20° and swivels 360°. Made of high grade ABS/Acetal plastic. AMPS holes. Color: black. Made in Sweden. Attach onto a Pedestal Mount.Fits the following modelsM3 Mobile SM20-series M3 Mobile SM15-series M3 Mobile SM10-series 

DKK 969.00
1

Brodit Passiv holder til M3 Mobile SM20-series/SM15-series/SM10-series - 511756

Brodit Passiv holder til M3 Mobile SM20-series/SM15-series/SM10-series - 511756

#html-body [data-pb-style=TN8JQQG]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Brodit Holder lavet specielt til M3 Mobile SM20-series/SM15-series/SM10-series hvilket sikrer at telefonen sidder sikkert i holderen.Med en Brodit Passiv holder har du altid din enhed lige ved hånden, klar til brug. Brodits holdere er monteret på et kugleled så skærmen på din M3 Mobile SM20-series/SM15-series/SM10-series kan vippes så vinklen passer i forhold til placeringen af holderen og alt efter hvor lysindfaldet kommer fra.Kugleledet sikre ligeledes at du kan anvende enheden i liggende position, hvis du har brug for det.Dette er en passiv holder, hvilket vil sige at holderen er lavet til blot at holde telefonen uden indbygget opladning. Holderen er åben i bunden hvilket giver mulighed for at tilslutte en almindelig billader eller kabel til enheden hvis opladning ønskes.Ønsker du en holder med laderstik indbygget skal du bruge en aktiv holder med indbygget ladestik i stedet for.Vi anbefaler at holderen hvis den skal bruges i bilen monteres på en Brodit ProClip for den sikreste montering. Ved montering med Brodit proclips beslag skånes bilens interiør og du får en sikker montering der ikke falder ned eller beskadiger bilen. Alternativt kan holderen monteres med skruer direkte på instrument brættet eller en anden type beslag.Se vores udvalg af Brodit ProClips og bilbeslag lige her Ved montering i butik eller på eksempelvis lager anbefaler vi Brodits Piedestal serie.Se vores store udvalg af monteringsløsninger her. Model: 511756Passer til følgende M3 Mobile modeller:M3 Mobile SM20-series M3 Mobile SM15-series M3 Mobile SM10-series EAN nummer: 7320285117563

DKK 475.00
1

Brodit Passiv holder til M3 Mobile SM20-series/SM15-series/SM10-series - 511755

Brodit Passiv holder til M3 Mobile SM20-series/SM15-series/SM10-series - 511755

#html-body [data-pb-style=FRLQ2B3]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Brodit Holder lavet specielt til M3 Mobile SM20-series/SM15-series/SM10-series hvilket sikrer at telefonen sidder sikkert i holderen.Med en Brodit Passiv holder har du altid din enhed lige ved hånden, klar til brug. Brodits holdere er monteret på et kugleled så skærmen på din M3 Mobile SM20-series/SM15-series/SM10-series kan vippes så vinklen passer i forhold til placeringen af holderen og alt efter hvor lysindfaldet kommer fra.Kugleledet sikre ligeledes at du kan anvende enheden i liggende position, hvis du har brug for det.Dette er en passiv holder, hvilket vil sige at holderen er lavet til blot at holde telefonen uden indbygget opladning. Holderen er åben i bunden hvilket giver mulighed for at tilslutte en almindelig billader eller kabel til enheden hvis opladning ønskes.Ønsker du en holder med laderstik indbygget skal du bruge en aktiv holder med indbygget ladestik i stedet for.Vi anbefaler at holderen hvis den skal bruges i bilen monteres på en Brodit ProClip for den sikreste montering. Ved montering med Brodit proclips beslag skånes bilens interiør og du får en sikker montering der ikke falder ned eller beskadiger bilen. Alternativt kan holderen monteres med skruer direkte på instrument brættet eller en anden type beslag.Se vores udvalg af Brodit ProClips og bilbeslag lige her Ved montering i butik eller på eksempelvis lager anbefaler vi Brodits Piedestal serie.Se vores store udvalg af monteringsløsninger her. Model: 511755Passer til følgende M3 Mobile modeller:M3 Mobile SM20-series M3 Mobile SM15-series M3 Mobile SM10-series  EAN nummer: 7320285117556

DKK 332.00
1

Brodit Aktiv Holder med fast installation og kugleled til M3 Mobile SL10 - 713159

Brodit Aktiv Holder med fast installation og kugleled til M3 Mobile SL10 - 713159

#html-body [data-pb-style=BAR0HPF]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Active holder for fixed installationWith tilt swivel. 3A charging. 12/24V. With Easy-switching system. For device without Rugged Boot.An active holder which is to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior!You can choose to use the holder as an active holder for charging of your device only, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS receiver or other own solutions (can not be used for data communication or audio connection). 12/24 Volt. The product is E-approved. Connect the power cable with a 3 A fuse. 3 A charger.  Professional installation recommended.Easy-switching system:The easy-switching system enables you to upgrade the holder only, and keep the installed cables. It saves you a lot of time! When upgrading to a new device, you do not longer need to make a full installation. Same goes for maintenance in case of warranty or damage. You simply disconnect the holder from the charging cable via the Molex 6-pin quick connector, and then connect the new holder. The switch is done in a few seconds.The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 17° and swivels 360°. Mounting plate 42x50 mm with 4 mm AMPS-holes. Made of high grade black ABS/Acetal plastic. Made in Sweden. Connect the power cable with a 3A fuse. Professional installation recommended. Attach onto a ProClip Mounting Platform or a Pedestal Mount.Fits the following modelsM3 Mobile SL10 

DKK 839.00
2

Brodit Passiv Holder med vibrationsdæmper til M3 Mobile SM15-series og M3 Mobile SM10-series - 710158

Brodit Passiv Holder med vibrationsdæmper til M3 Mobile SM15-series og M3 Mobile SM10-series - 710158

#html-body [data-pb-style=JDYJDMM]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Passive holderWith vibration dampeners. Fits SM10/15 Pistolgrip with Bumper (SM10-TRIG-800) and fits Pistolgrip Long Range without Bumper (SM15-TRIG-L00).Keep your unit in a passive holder and you will always have it within easy sight and reach! Neat, discreet and convenient. Custom made with a perfect, firm fit. The rubber vibration dampeners help to eliminate vibrations when mounted onto a vehicle operating in rough road conditions. You have full access to all buttons and outlets when the device is in the holder. You can connect a charging cable or portable handsfree to the device when it is in the holder.Made of high grade black ABS/Acetal plastic. Color: black. Made in Sweden. Attach onto a Pedestal Mount.Fits the following modelsM3 Mobile SM15-series M3 Mobile SM10-series 

DKK 759.00
1

Brodit Passiv Holder med kugleled til M3 Mobile SM15-series og M3 Mobile SM10-series - 711157

Brodit Passiv Holder med kugleled til M3 Mobile SM15-series og M3 Mobile SM10-series - 711157

#html-body [data-pb-style=JW86LEM]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Passive holder with tilt swivelFits SM10/15 Pistolgrip with bumper (SM10-TRIG-800) and fits Pistolgrip Long Range without Bumper (SM15-TRIG-L00).Keep your unit in a passive holder and you will always have it within easy sight and reach! Neat, discreet and convenient. Custom made with a perfect, firm fit. You have full access to all buttons and outlets when the device is in the holder. You can connect a charging cable or portable handsfree to the device when it is in the holder.The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 17° and swivels 360°. Mounting plate 42x50 mm with 4 mm AMPS-holes. Made of high grade black ABS/Acetal plastic. Color: black. Made in Sweden. Attach onto a Pedestal Mount.Fits the following modelsM3 Mobile SM15-series M3 Mobile SM10-series 

DKK 699.00
1

Brodit Aktiv Holder til fast installation til M3 Mobile SM20-series /SM15-series/SM10-series - 713036

Brodit Aktiv Holder til fast installation til M3 Mobile SM20-series /SM15-series/SM10-series - 713036

#html-body [data-pb-style=IESDOWV]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Active holder for fixed installationFor device with bumper. Extra robust holder with top support. 2A charger. 12/24 Volt.An extra robust active holder which is to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior! With an extra firm fit and top support. For professional every day use in rough environments. For use with device with bumper.You can choose to use the holder as an active holder for charging of your device only, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS receiver or other own solutions (can not be used for data communication or audio connection)12/24 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger.  Professional installation recommended. The holders are equipped with a tilt swivel so you can easily adjust the angle of your device for better viewing. Tilts 20° and swivels 360°. Made of high grade ABS/Acetal plastic. AMPS holes. Color: black. Made in Sweden. Attach onto a Pedestal Mount.Fits the following modelsM3 Mobile SM20-series M3 Mobile SM15-series M3 Mobile SM10-series 

DKK 969.00
1

Brodit Aktiv Holder med fast installation til M3 Mobile SM15-series og M3 Mobile SM10-series - 713158

Brodit Aktiv Holder med fast installation til M3 Mobile SM15-series og M3 Mobile SM10-series - 713158

#html-body [data-pb-style=DTPPMMK]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Active holder for fixed installation3A charging. 12/24V. With Easy-switching system. With vibration dampeners. Fits SM10/15 Pistolgrip with Bumper (SM10-TRIG-800) and fits Pistolgrip Long Range without Bumper (SM15-TRIG-L00).An active holder which is to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior! You can choose to use the holder as an active holder for charging of your device only, or to connect an adapter to the Molex connector for additional features. 12/24 Volt. The product is E-approved. Connect the power cable with a 3 A fuse. 3 A charger. Professional installation recommended. The rubber vibration dampeners help to eliminate vibrations when mounted onto a vehicle operating in rough road conditions. You have full access to all buttons and outlets when the device is in the holder. The charging device connects to the unit automatically when you put the unit in the holder.Made of high grade black ABS/Acetal plastic. Made in Sweden. Connect the power cable with a 3A fuse. Professional installation recommended. Attach onto a Pedestal Mount.Easy-switching system:The easy-switching system enables you to upgrade the holder only, and keep the installed cables. It saves you a lot of time! When upgrading to a new device, you do not longer need to make a full installation. Same goes for maintenance in case of warranty or damage. You simply disconnect the holder from the charging cable via the Molex 6-pin quick connector, and then connect the new holder. The switch is done in a few seconds.Fits the following modelsM3 Mobile SM15-series M3 Mobile SM10-series 

DKK 1199.00
1

Brodit Aktiv Holder med fast installation og kugleled til M3 Mobile SM15-series og M3 Mobile SM10-series - 713157

Brodit Aktiv Holder med fast installation og kugleled til M3 Mobile SM15-series og M3 Mobile SM10-series - 713157

#html-body [data-pb-style=YMCSIOK]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Active holder for fixed installationWith tilt swivel. 3A charging. 12/24V. With Easy-switching system. Fits SM10/15 Pistolgrip with Bumper (SM10-TRIG-800) and fits Pistolgrip Long Range without Bumper (SM15-TRIG-L00).An active holder which is to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior! You can choose to use the holder as an active holder for charging of your device only, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS receiver or other own solutions (can not be used for data communication or audio connection). 12/24 Volt. The product is E-approved. Connect the power cable with a 3 A fuse. 3 A charger.  Professional installation recommended.The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 17° and swivels 360°. Mounting plate 42x50 mm with 4 mm AMPS-holes. Made of high grade black ABS/Acetal plastic. Made in Sweden. Connect the power cable with a 3A fuse. Professional installation recommended. Attach onto a Pedestal Mount.Easy-switching system:The easy-switching system enables you to upgrade the holder only, and keep the installed cables. It saves you a lot of time! When upgrading to a new device, you do not longer need to make a full installation. Same goes for maintenance in case of warranty or damage. You simply disconnect the holder from the charging cable via the Molex 6-pin quick connector, and then connect the new holder. The switch is done in a few seconds.Fits the following modelsM3 Mobile SM15-series M3 Mobile SM10-series 

DKK 1169.00
1

Brodit Aktiv Holder med kugleled til M3 Mobile SM20-series, M3 Mobile SM15-series, M3 Mobile SM10-series - 721036

Brodit Aktiv Holder med kugleled til M3 Mobile SM20-series, M3 Mobile SM15-series, M3 Mobile SM10-series - 721036

#html-body [data-pb-style=EOVQROY]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Active holder with USB-cable and cig-plug adapterArt.721036With USB-cable with cig-plug adapter. With tilt swivel. For device with bumper. Extra robust holder with top support.Extra robust holders with an extra firm fit and top support. For professional every day use in rough environments. For use with device with bumper. With USB-cable with cig-plug adapter, choose to connect either to the vehicle's USB outlet or the 12/24V socket.The holders are equipped with a tilt swivel so you can easily adjust the angle of your device for better viewing. Tilts 17° and swivels 360°. Made of high grade ABS/Acetal plastic. AMPS holes. Color: black. Made in Sweden. Attach onto a Pedestal Mount.Fits for:M3 Mobile SM20-seriesM3 Mobile SM15-seriesM3 Mobile SM10-series

DKK 969.00
1

Brodit Faststrøm Aktiv Holder med kugleled til M3 Mobile SM20-series, M3 Mobile SM15-series, M3 Mobile SM10-series - 513755

Brodit Faststrøm Aktiv Holder med kugleled til M3 Mobile SM20-series, M3 Mobile SM15-series, M3 Mobile SM10-series - 513755

#html-body [data-pb-style=TTTT8NQ]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Active holder for fixed installationArt.513755With tilt swivel, with Molex adapter system. 2A charger. For device without bumper.An active holder which is to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior!You can choose to use the holder as an active holder for charging of your device only, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS receiver or other own solutions (can not be used for data communication or audio connection).12/24 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger.  Professional installation recommended. The holder is attached onto a tilt swivel so you can easily adjust your device in order to avoid light reflection. Attach onto a ProClip Mounting Platform.Fits for:M3 Mobile SM20-seriesM3 Mobile SM15-seriesM3 Mobile SM10-series

DKK 789.00
1

Brodit Aktiv Holder med cigaradaptor og kugleled til M3 Mobile SM20-series, M3 Mobile SM15-series, M3 Mobile SM10-series - 512755

Brodit Aktiv Holder med cigaradaptor og kugleled til M3 Mobile SM20-series, M3 Mobile SM15-series, M3 Mobile SM10-series - 512755

#html-body [data-pb-style=YUYS1TO]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Active holder with cig-plugArt.512755With tilt swivel. For device without bumper.The active holder charges your battery when it is in the holder. The charging device connects to the PDA automatically when you put the PDA in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.Fits for:M3 Mobile SM20-seriesM3 Mobile SM15-seriesM3 Mobile SM10-series

DKK 789.00
1

Brodit Aktiv Holder til M3 Mobile SM15-series og M3 Mobile SM10-series - 712158

Brodit Aktiv Holder til M3 Mobile SM15-series og M3 Mobile SM10-series - 712158

#html-body [data-pb-style=KB0FGL1]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Active holder with cig-plugArt.7121583A charging. 12/24V. With Easy-switching system. With vibration dampeners. Fits SM10/15 Pistolgrip with Bumper (SM10-TRIG-800) and fits Pistolgrip Long Range without Bumper (SM15-TRIG-L00).Always keep your battery fully charged with this active holder with cig-plug cable and you will always have it within easy sight and reach! Neat, discreet and convenient. Custom made with a perfect, firm fit. The rubber vibration dampeners help to eliminate vibrations when mounted onto a vehicle operating in rough road conditions. You have full access to all buttons and outlets when the device is in the holder. The charging device connects to the unit automatically when you put the unit in the holder.Made of high grade black ABS/Acetal plastic. Color: black. Made in Sweden. Attach onto a Pedestal Mount.Easy-switching system:The easy-switching system enables you to upgrade the holder only, and keep the installed cables. It saves you a lot of time! When upgrading to a new device, you do not longer need to make a full installation. Same goes for maintenance in case of warranty or damage. You simply disconnect the holder from the charging cable via the Molex 6-pin quick connector, and then connect the new holder. The switch is done in a few seconds.Fits for:M3 Mobile SM15-seriesM3 Mobile SM10-series

DKK 1199.00
1

Brodit Aktiv Holder med kugleled til M3 Mobile SM15-series og M3 Mobile SM10-series - 712157

Brodit Aktiv Holder med kugleled til M3 Mobile SM15-series og M3 Mobile SM10-series - 712157

#html-body [data-pb-style=SMVJ4VT]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Active holder with cig-plugArt.712157With tilt swivel. 3A charging. 12/24V. With Easy-switching system. Fits SM10/15 Pistolgrip with Bumper (SM10-TRIG-800) and fits Pistolgrip Long Range without Bumper (SM15-TRIG-L00).Always keep your battery fully charged with this active holder with cig-plug cable. The charging device connects to the unit automatically when you put the unit in the holder. The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 17° and swivels 360°. Mounting plate 42x50 mm with 4 mm AMPS-holes. Made of high grade black ABS/Acetal plastic. Color: black. Made in Sweden. Attach onto a Pedestal Mount.Easy-switching system:The easy-switching system enables you to upgrade the holder only, and keep the installed cables. It saves you a lot of time! When upgrading to a new device, you do not longer need to make a full installation. Same goes for maintenance in case of warranty or damage. You simply disconnect the holder from the charging cable via the Molex 6-pin quick connector, and then connect the new holder. The switch is done in a few seconds.Fits for:M3 Mobile SM15-seriesM3 Mobile SM10-series

DKK 1169.00
1

Brodit Faststrøm Aktiv Holder med kugleled til M3 Mobile SM15-series og M3 Mobile SM10-series - 513756

Brodit Faststrøm Aktiv Holder med kugleled til M3 Mobile SM15-series og M3 Mobile SM10-series - 513756

#html-body [data-pb-style=KPBAQE0]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Active holder for fixed installationArt.513756With tilt swivel, with Molex adapter system. 2A charger. For device with bumper.An active holder which is to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior!You can choose to use the holder as an active holder for charging of your device only, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS receiver or other own solutions (can not be used for data communication or audio connection).12/24 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger.  Professional installation recommended. The holder is attached onto a tilt swivel so you can easily adjust your device in order to avoid light reflection. Attach onto a ProClip Mounting Platform.Fits for:M3 Mobile SM15-seriesM3 Mobile SM10-series

DKK 839.00
1

Brodit Aktiv Holder med cigaradaptor og kugleled til M3 Mobile SM15-series og M3 Mobile SM10-series - 512756

Brodit Aktiv Holder med cigaradaptor og kugleled til M3 Mobile SM15-series og M3 Mobile SM10-series - 512756

#html-body [data-pb-style=C2DUMX5]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Active holder with cig-plugArt.512756With tilt swivel. For device with bumper.The active holder charges your battery when it is in the holder. The charging device connects to the PDA automatically when you put the PDA in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.Fits for:M3 Mobile SM15-seriesM3 Mobile SM10-series

DKK 839.00
1

Brodit Proclip Monteringsbeslag - Toyota LandCruiser 100 98-01 (KUN til modeller med dobbelt DIN radio)

Brodit Proclip Monteringsbeslag - Toyota LandCruiser 100 98-01 (KUN til modeller med dobbelt DIN radio)

#html-body [data-pb-style=VWCWWDA]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Smart Proclip bilbeslag fra kendte Brodit. ProClip er et monterings beslag til din bils instrumentbræt. På en Brodit ProClip kan du installere f.eks en holder til din smartphone, GPS eller tablet.Bil beslaget er lavet specifikt til den enkelte bil model og årgang hvilket sikrer at den sidder sikkert og altid inden for rækkevidde. ProClip er let at installere. Installationen er hurtig, ingen specielle værktøjer eller afmontering af instrumentbrættet er påkrævet, og beslaget skader ikke instrumentbrættet og kan fjernes igen uden at efterlade spor. Lavet i holdbar sort ABS-plast. Leveres med detaljerede monterings instruktioner. Du kan montere både Brodit og Fix2Car mobilholdere på dette Brodit Proclips beslag. Se vores mobilholdere lige her. Modelnummer:852643 Passer til følgende modeller:Toyota LandCruiser 100 1998-2001 OBS: Passer KUN til modeller med dobbelt DIN radio. Monteringsplacering: Center Mount - til højre for rattet EAN:7320288526430

DKK 199.00
1

Brodit Passiv Holder med kugleled til M3 Mobile US20 - 711249

Brodit Passiv Holder med kugleled til M3 Mobile US20 - 711249

#html-body [data-pb-style=O0Y5J41]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Passive holder with tilt swivelFits both with and without pistol grip. Adjustable swiveling top for extra secure hold.With your PDA in a passive holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the PDA in the holder, and to take it out of the holder. You can connect e.g. a charging cable to the PDA when it is in the holder. Attach onto a Pedestal Mount.Fits the following modelsM3 Mobile US20 

DKK 1009.00
1

Brodit Passiv Holder med kugleled til M3 Mobile US20 - 711248

Brodit Passiv Holder med kugleled til M3 Mobile US20 - 711248

#html-body [data-pb-style=K4TRELQ]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Passive holder with tilt swivelFits both with and without pistol grip. With your PDA in a passive holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the PDA in the holder, and to take it out of the holder. You can connect e.g. a charging cable to the PDA when it is in the holder. Attach onto a Pedestal Mount.Fits the following modelsM3 Mobile US20 

DKK 599.00
1

Brodit Passiv Holder med kugleled til M3 Mobile SL10 - 711215

Brodit Passiv Holder med kugleled til M3 Mobile SL10 - 711215

#html-body [data-pb-style=SKF4GVJ]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Passive holder with tilt swivelFor device with Rugged BootKeep your unit in a passive holder and you will always have it within easy sight and reach! Neat, discreet and convenient. Custom made with a perfect, firm fit. You have full access to the camera and all buttons and outlets when the device is in the holder. You can connect a charging cable or portable handsfree to the device when it is in the holder.The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 17° and swivels 360°. Mounting plate 42x50 mm with 4 mm AMPS-holes. Made of high grade black ABS/Acetal plastic. Made in Sweden. Attach onto a Pedestal Mount or an ProClip mounting platform.Fits the following modelsM3 Mobile SL10 

DKK 329.00
1

Brodit Passiv Holder med kugleled til M3 Mobile SL10 - 711159

Brodit Passiv Holder med kugleled til M3 Mobile SL10 - 711159

#html-body [data-pb-style=SJPLHA3]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Passive holder with tilt swivelFor device without Rugged Boot. Keep your unit in a passive holder and you will always have it within easy sight and reach! Neat, discreet and convenient. Custom made with a perfect, firm fit. You have full access to the camera and all buttons and outlets when the device is in the holder. You can connect a charging cable or portable handsfree to the device when it is in the holder.The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 17° and swivels 360°. Mounting plate 42x50 mm with 4 mm AMPS-holes. Made of high grade black ABS/Acetal plastic. Made in Sweden. Attach onto a Pedestal Mount or an ProClip mounting platform.Fits the following modelsM3 Mobile SL10 

DKK 329.00
1

Brodit Passiv Holder med kugleled til M3 Mobile SL20 - 711283

Brodit Passiv Holder med kugleled til M3 Mobile SL20 - 711283

#html-body [data-pb-style=AB4DH0U]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Passive holder with tilt swivelFits for device with or without handstrap. For device without Rugged Boot.Keep your unit in a passive holder and you will always have it within easy sight and reach! Neat, discreet and convenient. Custom made with a perfect, firm fit. You have full access to the camera and all buttons and outlets when the device is in the holder. You can connect a charging cable or portable handsfree to the device when it is in the holder.The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 17° and swivels 360°. Mounting plate 42x50 mm with 4 mm AMPS-holes. Made of high grade black ABS/Acetal plastic. Color: black. Made in Sweden. Attach onto a ProClip Mounting Platform or a Pedestal Mount.Fits the following modelsM3 Mobile SL20 

DKK 329.00
1