Pricemate

Grundfos Magna3 32-80 Cirkulating Pump 180 mm - Pumpen - 97924256

Die Premium-wahl, Wenn Die Systemsteuerung Und Überwachung Entscheidend Sind. Die Magna3 Unterstützt Feldbus Durch Optionale Cim-module Und Verfügt Über Ein Tft-display Zur Intuitiven Konfiguration Der Intelligenten Funktionen. Anwendungen: Heizung, Klimatisierung, Pumpendesigns: Dosenrotor Technische Daten: Maximaler Kopf: 18,88 m Flüssigkeitstemperatur: -10 .. 110 ° C Maximaler Durchfluss: 76,6 m3 / h P Max : 16 Bar

EUR 925.36

1

Grundfos Magna3 25-80 Cirkulating Pump 180 mm - Pumpen - 97924246

Magna3 40-100 Fmagna3 - More Than a Pumpwith Its Unrivalled Efficiency, All-encompassing Range And Built-in Communication Capabilities Plus Functionalities Replacing System Components, The Magna3 is Ideal For Engineers And Specifiers Looking to Create High-performance Systems For Buildings. This Pump in The Grundfos Master Class Will Fit Both Heating And Cooling Applications Perfectly, Making it The Obvious Choice For Almost Any Building Project - Old or New.The Magna3 is of The Canned-rotor Type, i.e. Pump And Motor Form an Integral Unit Without Shaft Seal And With Only Two Gaskets For Sealing. The Bearings Are Lubricated by The Pumped Liquid.The Innovative Clamp With Only One Screw Enables Easy Repositioning of The Pump Head. The Magna3 is a Pump With no Maintenance Requirements And With Extremely Low Life Cycle Cost.The Pump is Characterised by The Following: Controller Integrated in The Control Box Control Panel With Tft Display on The Control Box Control Box Prepared For Optional Cim Modules Built-in Differential-pressure And Temperature Sensor Cast-iron Pump Housing (Depending on Model) Carbon-fibre-reinforced Composite Rotor Can Stainless-steel Bearing Plate And Rotor Cladding Aluminium Alloy Stator Housing Air-cooled Power Electronicsthe Magna3 is a Single-phase Pump.Characteristic Features Autoadapt. Flowadapt And Flowlimit (More Than a Pump Function as it Reduces The Need For Pump Throttling Valves). Proportional-pressure Control. Constant-pressure Control. Constant-temperature Control. Constant-curve Duty. Max. or Min. Curve Duty. Automatic Night Setback. No External Motor Protection Required. Insulating Shells Supplied With Single-head Pumps For Heating Systems. Large Temperature Range Where The Liquid Temperature And The Ambient Temperature Are Independent of Each Other.Communicationthe Magna3 Enables Communication Via The Following: Wireless Grundfos GO Remot

EUR 1021.76

1

Grundfos Magna3 32-100 Cirkulating Pump 180 mm - Pumpen - 97924257

Magna3 40-100 Fmagna3 - More Than a Pumpwith Its Unrivalled Efficiency, All-encompassing Range And Built-in Communication Capabilities Plus Functionalities Replacing System Components, The Magna3 is Ideal For Engineers And Specifiers Looking to Create High-performance Systems For Buildings. This Pump in The Grundfos Master Class Will Fit Both Heating And Cooling Applications Perfectly, Making it The Obvious Choice For Almost Any Building Project - Old or New.The Magna3 is of The Canned-rotor Type, i.e. Pump And Motor Form an Integral Unit Without Shaft Seal And With Only Two Gaskets For Sealing. The Bearings Are Lubricated by The Pumped Liquid.The Innovative Clamp With Only One Screw Enables Easy Repositioning of The Pump Head. The Magna3 is a Pump With no Maintenance Requirements And With Extremely Low Life Cycle Cost.The Pump is Characterised by The Following: Controller Integrated in The Control Box Control Panel With Tft Display on The Control Box Control Box Prepared For Optional Cim Modules Built-in Differential-pressure And Temperature Sensor Cast-iron Pump Housing (Depending on Model) Carbon-fibre-reinforced Composite Rotor Can Stainless-steel Bearing Plate And Rotor Cladding Aluminium Alloy Stator Housing Air-cooled Power Electronicsthe Magna3 is a Single-phase Pump.Characteristic Features Autoadapt. Flowadapt And Flowlimit (More Than a Pump Function as it Reduces The Need For Pump Throttling Valves). Proportional-pressure Control. Constant-pressure Control. Constant-temperature Control. Constant-curve Duty. Max. or Min. Curve Duty. Automatic Night Setback. No External Motor Protection Required. Insulating Shells Supplied With Single-head Pumps For Heating Systems. Large Temperature Range Where The Liquid Temperature And The Ambient Temperature Are Independent of Each Other.Communicationthe Magna3 Enables Communication Via The Following: Wireless Grundfos GO Remot

EUR 1087.78

1

Grundfos Magna3 50-60 f 240 1x230v Pn6/10 - Pumpen - 97924281

Magna3 50-60 Fmagna3 - More Than a Pumpwith Its Unrivalled Efficiency, All-encompassing Range And Built-in Communication Capabilities Plus Functionalities Replacing System Components, The Magna3 is Ideal For Engineers And Specifiers Looking to Create High-performance Systems For Buildings. This Pump in The Grundfos Master Class Will Fit Both Heating And Cooling Applications Perfectly, Making it The Obvious Choice For Almost Any Building Project - Old or New.The Magna3 is of The Canned-rotor Type, i.e. Pump And Motor Form an Integral Unit Without Shaft Seal And With Only Two Gaskets For Sealing. The Bearings Are Lubricated by The Pumped Liquid.The Innovative Clamp With Only One Screw Enables Easy Repositioning of The Pump Head. The Magna3 is a Pump With no Maintenance Requirements And With Extremely Low Life Cycle Cost.The Pump is Characterised by The Following: Controller Integrated in The Control Box Control Panel With Tft Display on The Control Box Control Box Prepared For Optional Cim Modules Built-in Differential-pressure And Temperature Sensor Cast-iron Pump Housing (Depending on Model) Carbon-fibre-reinforced Composite Rotor Can Stainless-steel Bearing Plate And Rotor Cladding Aluminium Alloy Stator Housing Air-cooled Power Electronicsthe Magna3 is a Single-phase Pump.Characteristic Features Autoadapt. Flowadapt And Flowlimit (More Than a Pump Function as it Reduces The Need For Pump Throttling Valves). Proportional-pressure Control. Constant-pressure Control. Constant-temperature Control. Constant-curve Duty. Max. or Min. Curve Duty. Automatic Night Setback. No External Motor Protection Required. Insulating Shells Supplied With Single-head Pumps For Heating Systems. Large Temperature Range Where The Liquid Temperature And The Ambient Temperature Are Independent of Each Other.Communicationthe Magna3 Enables Communication Via The Following: Wireless Grundfos GO Remote

EUR 2578.37

1

Grundfos Magna3 65-120 f 340 1x230v Pn6/10 - Pumpen - 97924298

Magna3 65-120 Fmagna3 - More Than a Pumpwith Its Unrivalled Efficiency, All-encompassing Range And Built-in Communication Capabilities Plus Functionalities Replacing System Components, The Magna3 is Ideal For Engineers And Specifiers Looking to Create High-performance Systems For Buildings. This Pump in The Grundfos Master Class Will Fit Both Heating And Cooling Applications Perfectly, Making it The Obvious Choice For Almost Any Building Project - Old or New.The Magna3 is of The Canned-rotor Type, i.e. Pump And Motor Form an Integral Unit Without Shaft Seal And With Only Two Gaskets For Sealing. The Bearings Are Lubricated by The Pumped Liquid.The Innovative Clamp With Only One Screw Enables Easy Repositioning of The Pump Head. The Magna3 is a Pump With no Maintenance Requirements And With Extremely Low Life Cycle Cost.The Pump is Characterised by The Following:• Controller Integrated in The Control Box• Control Panel With Tft Display on The Control Box• Control Box Prepared For Optional Cim Modules• Built-in Differential-pressure And Temperature Sensor• Cast-iron Pump Housing (Depending on Model)• Carbon-fibre-reinforced Composite Rotor Can• Stainless-steel Bearing Plate And Rotor Cladding• Aluminium Alloy Stator Housing• Air-cooled Power Electronicsthe Magna3 is a Single-phase Pump.Characteristic Features• Autoadapt.• Flowadapt And Flowlimit (More Than a Pump Function as it Reduces The Need For Pump Throttling Valves).• Proportional-pressure Control.• Constant-pressure Control.• Constant-temperature Control.• Constant-curve Duty.• Max. or Min. Curve Duty.• Automatic Night Setback.• No External Motor Protection Required.• Insulating Shells Supplied With Single-head Pumps For Heating Systems.• Large Temperature Range Where The Liquid Temperature And The Ambient Temperature Are Independent of Each Other.Communicationthe Magna3 Enables Communication Via The Following:• Wireless Grundfos GO Remot

EUR 3863.18

1

Grundfos Magna3 25-40 Cirkulating Pump 180 mm - Pumpen - 97924244

Magna3 40-100 Fmagna3 - More Than a Pumpwith Its Unrivalled Efficiency, All-encompassing Range And Built-in Communication Capabilities Plus Functionalities Replacing System Components, The Magna3 is Ideal For Engineers And Specifiers Looking to Create High-performance Systems For Buildings. This Pump in The Grundfos Master Class Will Fit Both Heating And Cooling Applications Perfectly, Making it The Obvious Choice For Almost Any Building Project - Old or New.The Magna3 is of The Canned-rotor Type, i.e. Pump And Motor Form an Integral Unit Without Shaft Seal And With Only Two Gaskets For Sealing. The Bearings Are Lubricated by The Pumped Liquid.The Innovative Clamp With Only One Screw Enables Easy Repositioning of The Pump Head. The Magna3 is a Pump With no Maintenance Requirements And With Extremely Low Life Cycle Cost.The Pump is Characterised by The Following:• Controller Integrated in The Control Box• Control Panel With Tft Display on The Control Box• Control Box Prepared For Optional Cim Modules• Built-in Differential-pressure And Temperature Sensor• Cast-iron Pump Housing (Depending on Model)• Carbon-fibre-reinforced Composite Rotor Can• Stainless-steel Bearing Plate And Rotor Cladding• Aluminium Alloy Stator Housing• Air-cooled Power Electronicsthe Magna3 is a Single-phase Pump.Characteristic Features• Autoadapt.• Flowadapt And Flowlimit (More Than a Pump Function as it Reduces The Need For Pump Throttling Valves).• Proportional-pressure Control.• Constant-pressure Control.• Constant-temperature Control.• Constant-curve Duty.• Max. or Min. Curve Duty.• Automatic Night Setback.• No External Motor Protection Required.• Insulating Shells Supplied With Single-head Pumps For Heating Systems.• Large Temperature Range Where The Liquid Temperature And The Ambient Temperature Are Independent of Each Other.Communicationthe Magna3 Enables Communication Via The Following:• Wireless Grundfos GO Remot

EUR 781.79

1

Grundfos Magna3 32-60 Cirkulating Pump 180 mm - Pumpen - 97924255

Magna3 40-100 Fmagna3 - More Than a Pumpwith Its Unrivalled Efficiency, All-encompassing Range And Built-in Communication Capabilities Plus Functionalities Replacing System Components, The Magna3 is Ideal For Engineers And Specifiers Looking to Create High-performance Systems For Buildings. This Pump in The Grundfos Master Class Will Fit Both Heating And Cooling Applications Perfectly, Making it The Obvious Choice For Almost Any Building Project - Old or New.The Magna3 is of The Canned-rotor Type, i.e. Pump And Motor Form an Integral Unit Without Shaft Seal And With Only Two Gaskets For Sealing. The Bearings Are Lubricated by The Pumped Liquid.The Innovative Clamp With Only One Screw Enables Easy Repositioning of The Pump Head. The Magna3 is a Pump With no Maintenance Requirements And With Extremely Low Life Cycle Cost.The Pump is Characterised by The Following:• Controller Integrated in The Control Box• Control Panel With Tft Display on The Control Box• Control Box Prepared For Optional Cim Modules• Built-in Differential-pressure And Temperature Sensor• Cast-iron Pump Housing (Depending on Model)• Carbon-fibre-reinforced Composite Rotor Can• Stainless-steel Bearing Plate And Rotor Cladding• Aluminium Alloy Stator Housing• Air-cooled Power Electronicsthe Magna3 is a Single-phase Pump.Characteristic Features• Autoadapt.• Flowadapt And Flowlimit (More Than a Pump Function as it Reduces The Need For Pump Throttling Valves).• Proportional-pressure Control.• Constant-pressure Control.• Constant-temperature Control.• Constant-curve Duty.• Max. or Min. Curve Duty.• Automatic Night Setback.• No External Motor Protection Required.• Insulating Shells Supplied With Single-head Pumps For Heating Systems.• Large Temperature Range Where The Liquid Temperature And The Ambient Temperature Are Independent of Each Other.Communicationthe Magna3 Enables Communication Via The Following:• Wireless Grundfos GO Remot

EUR 993.37

1

Grundfos Magna3 65-150 f 340 1x230v Pn6/10 - Pumpen - 97924299

Magna3 65-150 Fmagna3 - More Than a Pumpwith Its Unrivalled Efficiency, All-encompassing Range And Built-in Communication Capabilities Plus Functionalities Replacing System Components, The Magna3 is Ideal For Engineers And Specifiers Looking to Create High-performance Systems For Buildings. This Pump in The Grundfos Master Class Will Fit Both Heating And Cooling Applications Perfectly, Making it The Obvious Choice For Almost Any Building Project - Old or New.The Magna3 is of The Canned-rotor Type, i.e. Pump And Motor Form an Integral Unit Without Shaft Seal And With Only Two Gaskets For Sealing. The Bearings Are Lubricated by The Pumped Liquid.The Innovative Clamp With Only One Screw Enables Easy Repositioning of The Pump Head. The Magna3 is a Pump With no Maintenance Requirements And With Extremely Low Life Cycle Cost.The Pump is Characterised by The Following:• Controller Integrated in The Control Box• Control Panel With Tft Display on The Control Box• Control Box Prepared For Optional Cim Modules• Built-in Differential-pressure And Temperature Sensor• Cast-iron Pump Housing (Depending on Model)• Carbon-fibre-reinforced Composite Rotor Can• Stainless-steel Bearing Plate And Rotor Cladding• Aluminium Alloy Stator Housing• Air-cooled Power Electronicsthe Magna3 is a Single-phase Pump.Characteristic Features• Autoadapt.• Flowadapt And Flowlimit (More Than a Pump Function as it Reduces The Need For Pump Throttling Valves).• Proportional-pressure Control.• Constant-pressure Control.• Constant-temperature Control.• Constant-curve Duty.• Max. or Min. Curve Duty.• Automatic Night Setback.• No External Motor Protection Required.• Insulating Shells Supplied With Single-head Pumps For Heating Systems.• Large Temperature Range Where The Liquid Temperature And The Ambient Temperature Are Independent of Each Other.Communicationthe Magna3 Enables Communication Via The Following:• Wireless Grundfos GO Remot

EUR 4502.43

1

Grundfos Magna3 25-60n Cirkulating Pump 180 mm - Pumpen - 97924337

Magna3 40-100 Fmagna3 - More Than a Pumpwith Its Unrivalled Efficiency, All-encompassing Range And Built-in Communication Capabilities Plus Functionalities Replacing System Components, The Magna3 is Ideal For Engineers And Specifiers Looking to Create High-performance Systems For Buildings. This Pump in The Grundfos Master Class Will Fit Both Heating And Cooling Applications Perfectly, Making it The Obvious Choice For Almost Any Building Project - Old or New.The Magna3 is of The Canned-rotor Type, i.e. Pump And Motor Form an Integral Unit Without Shaft Seal And With Only Two Gaskets For Sealing. The Bearings Are Lubricated by The Pumped Liquid.The Innovative Clamp With Only One Screw Enables Easy Repositioning of The Pump Head. The Magna3 is a Pump With no Maintenance Requirements And With Extremely Low Life Cycle Cost.The Pump is Characterised by The Following:• Controller Integrated in The Control Box• Control Panel With Tft Display on The Control Box• Control Box Prepared For Optional Cim Modules• Built-in Differential-pressure And Temperature Sensor• Cast-iron Pump Housing (Depending on Model)• Carbon-fibre-reinforced Composite Rotor Can• Stainless-steel Bearing Plate And Rotor Cladding• Aluminium Alloy Stator Housing• Air-cooled Power Electronicsthe Magna3 is a Single-phase Pump.Characteristic Features• Autoadapt.• Flowadapt And Flowlimit (More Than a Pump Function as it Reduces The Need For Pump Throttling Valves).• Proportional-pressure Control.• Constant-pressure Control.• Constant-temperature Control.• Constant-curve Duty.• Max. or Min. Curve Duty.• Automatic Night Setback.• No External Motor Protection Required.• Insulating Shells Supplied With Single-head Pumps For Heating Systems.• Large Temperature Range Where The Liquid Temperature And The Ambient Temperature Are Independent of Each Other.Communicationthe Magna3 Enables Communication Via The Following:• Wireless Grundfos GO Remot

EUR 3039.10

1

Grundfos Magna3 25-100 Cirkulating Pump 180 mm - Pumpen - 97924247

Magna3 40-100 Fmagna3 - More Than a Pumpwith Its Unrivalled Efficiency, All-encompassing Range And Built-in Communication Capabilities Plus Functionalities Replacing System Components, The Magna3 is Ideal For Engineers And Specifiers Looking to Create High-performance Systems For Buildings. This Pump in The Grundfos Master Class Will Fit Both Heating And Cooling Applications Perfectly, Making it The Obvious Choice For Almost Any Building Project - Old or New.The Magna3 is of The Canned-rotor Type, i.e. Pump And Motor Form an Integral Unit Without Shaft Seal And With Only Two Gaskets For Sealing. The Bearings Are Lubricated by The Pumped Liquid.The Innovative Clamp With Only One Screw Enables Easy Repositioning of The Pump Head. The Magna3 is a Pump With no Maintenance Requirements And With Extremely Low Life Cycle Cost.The Pump is Characterised by The Following:• Controller Integrated in The Control Box• Control Panel With Tft Display on The Control Box• Control Box Prepared For Optional Cim Modules• Built-in Differential-pressure And Temperature Sensor• Cast-iron Pump Housing (Depending on Model)• Carbon-fibre-reinforced Composite Rotor Can• Stainless-steel Bearing Plate And Rotor Cladding• Aluminium Alloy Stator Housing• Air-cooled Power Electronicsthe Magna3 is a Single-phase Pump.Characteristic Features• Autoadapt.• Flowadapt And Flowlimit (More Than a Pump Function as it Reduces The Need For Pump Throttling Valves).• Proportional-pressure Control.• Constant-pressure Control.• Constant-temperature Control.• Constant-curve Duty.• Max. or Min. Curve Duty.• Automatic Night Setback.• No External Motor Protection Required.• Insulating Shells Supplied With Single-head Pumps For Heating Systems.• Large Temperature Range Where The Liquid Temperature And The Ambient Temperature Are Independent of Each Other.Communicationthe Magna3 Enables Communication Via The Following:• Wireless Grundfos GO Remot

EUR 989.68

1

Grundfos Magna3 32-120 f 220 1x230v Pn6/10 - Pumpen - 97924259

Magna3 32-120 Fmagna3 - More Than a Pumpwith Its Unrivalled Efficiency, All-encompassing Range And Built-in Communication Capabilities Plus Functionalities Replacing System Components, The Magna3 is Ideal For Engineers And Specifiers Looking to Create High-performance Systems For Buildings. This Pump in The Grundfos Master Class Will Fit Both Heating And Cooling Applications Perfectly, Making it The Obvious Choice For Almost Any Building Project - Old or New.The Magna3 is of The Canned-rotor Type, i.e. Pump And Motor Form an Integral Unit Without Shaft Seal And With Only Two Gaskets For Sealing. The Bearings Are Lubricated by The Pumped Liquid.The Innovative Clamp With Only One Screw Enables Easy Repositioning of The Pump Head. The Magna3 is a Pump With no Maintenance Requirements And With Extremely Low Life Cycle Cost.The Pump is Characterised by The Following:• Controller Integrated in The Control Box• Control Panel With Tft Display on The Control Box• Control Box Prepared For Optional Cim Modules• Built-in Differential-pressure And Temperature Sensor• Cast-iron Pump Housing (Depending on Model)• Carbon-fibre-reinforced Composite Rotor Can• Stainless-steel Bearing Plate And Rotor Cladding• Aluminium Alloy Stator Housing• Air-cooled Power Electronicsthe Magna3 is a Single-phase Pump.Characteristic Features• Autoadapt.• Flowadapt And Flowlimit (More Than a Pump Function as it Reduces The Need For Pump Throttling Valves).• Proportional-pressure Control.• Constant-pressure Control.• Constant-temperature Control.• Constant-curve Duty.• Max. or Min. Curve Duty.• Automatic Night Setback.• No External Motor Protection Required.• Insulating Shells Supplied With Single-head Pumps For Heating Systems.• Large Temperature Range Where The Liquid Temperature And The Ambient Temperature Are Independent of Each Other.Communicationthe Magna3 Enables Communication Via The Following:• Wireless Grundfos GO Remot

EUR 1906.04

1

Grundfos Magna3 65-60 f 340 1x230v Pn6/10 - Pumpen - 97924295

Magna3 65-60 Fmagna3 - More Than a Pumpwith Its Unrivalled Efficiency, All-encompassing Range And Built-in Communication Capabilities Plus Functionalities Replacing System Components, The Magna3 is Ideal For Engineers And Specifiers Looking to Create High-performance Systems For Buildings. This Pump in The Grundfos Master Class Will Fit Both Heating And Cooling Applications Perfectly, Making it The Obvious Choice For Almost Any Building Project - Old or New.The Magna3 is of The Canned-rotor Type, i.e. Pump And Motor Form an Integral Unit Without Shaft Seal And With Only Two Gaskets For Sealing. The Bearings Are Lubricated by The Pumped Liquid.The Innovative Clamp With Only One Screw Enables Easy Repositioning of The Pump Head. The Magna3 is a Pump With no Maintenance Requirements And With Extremely Low Life Cycle Cost.The Pump is Characterised by The Following:• Controller Integrated in The Control Box• Control Panel With Tft Display on The Control Box• Control Box Prepared For Optional Cim Modules• Built-in Differential-pressure And Temperature Sensor• Cast-iron Pump Housing (Depending on Model)• Carbon-fibre-reinforced Composite Rotor Can• Stainless-steel Bearing Plate And Rotor Cladding• Aluminium Alloy Stator Housing• Air-cooled Power Electronicsthe Magna3 is a Single-phase Pump.Characteristic Features• Autoadapt.• Flowadapt And Flowlimit (More Than a Pump Function as it Reduces The Need For Pump Throttling Valves).• Proportional-pressure Control.• Constant-pressure Control.• Constant-temperature Control.• Constant-curve Duty.• Max. or Min. Curve Duty.• Automatic Night Setback.• No External Motor Protection Required.• Insulating Shells Supplied With Single-head Pumps For Heating Systems.• Large Temperature Range Where The Liquid Temperature And The Ambient Temperature Are Independent of Each Other.Communicationthe Magna3 Enables Communication Via The Following:• Wireless Grundfos GO Remote

EUR 3190.70

1

Grundfos Magna3 40-120 f 250 1x230v Pn6/10 - Pumpen - 97924270

Magna3 40-120 Fmagna3 - More Than a Pumpwith Its Unrivalled Efficiency, All-encompassing Range And Built-in Communication Capabilities Plus Functionalities Replacing System Components, The Magna3 is Ideal For Engineers And Specifiers Looking to Create High-performance Systems For Buildings. This Pump in The Grundfos Master Class Will Fit Both Heating And Cooling Applications Perfectly, Making it The Obvious Choice For Almost Any Building Project - Old or New.The Magna3 is of The Canned-rotor Type, i.e. Pump And Motor Form an Integral Unit Without Shaft Seal And With Only Two Gaskets For Sealing. The Bearings Are Lubricated by The Pumped Liquid.The Innovative Clamp With Only One Screw Enables Easy Repositioning of The Pump Head. The Magna3 is a Pump With no Maintenance Requirements And With Extremely Low Life Cycle Cost.The Pump is Characterised by The Following:• Controller Integrated in The Control Box• Control Panel With Tft Display on The Control Box• Control Box Prepared For Optional Cim Modules• Built-in Differential-pressure And Temperature Sensor• Cast-iron Pump Housing (Depending on Model)• Carbon-fibre-reinforced Composite Rotor Can• Stainless-steel Bearing Plate And Rotor Cladding• Aluminium Alloy Stator Housing• Air-cooled Power Electronicsthe Magna3 is a Single-phase Pump.Characteristic Features• Autoadapt.• Flowadapt And Flowlimit (More Than a Pump Function as it Reduces The Need For Pump Throttling Valves).• Proportional-pressure Control.• Constant-pressure Control.• Constant-temperature Control.• Constant-curve Duty.• Max. or Min. Curve Duty.• Automatic Night Setback.• No External Motor Protection Required.• Insulating Shells Supplied With Single-head Pumps For Heating Systems.• Large Temperature Range Where The Liquid Temperature And The Ambient Temperature Are Independent of Each Other.Communicationthe Magna3 Enables Communication Via The Following:• Wireless Grundfos GO Remot

EUR 2403.57

1

Grundfos Magna3 32-80f Cirkulating Pump 220 mm - Pumpen - 98333874

Magna3 40-100 Fmagna3 - More Than a Pumpwith Its Unrivalled Efficiency, All-encompassing Range And Built-in Communication Capabilities Plus Functionalities Replacing System Components, The Magna3 is Ideal For Engineers And Specifiers Looking to Create High-performance Systems For Buildings. This Pump in The Grundfos Master Class Will Fit Both Heating And Cooling Applications Perfectly, Making it The Obvious Choice For Almost Any Building Project - Old or New.The Magna3 is of The Canned-rotor Type, i.e. Pump And Motor Form an Integral Unit Without Shaft Seal And With Only Two Gaskets For Sealing. The Bearings Are Lubricated by The Pumped Liquid.The Innovative Clamp With Only One Screw Enables Easy Repositioning of The Pump Head. The Magna3 is a Pump With no Maintenance Requirements And With Extremely Low Life Cycle Cost.The Pump is Characterised by The Following:• Controller Integrated in The Control Box• Control Panel With Tft Display on The Control Box• Control Box Prepared For Optional Cim Modules• Built-in Differential-pressure And Temperature Sensor• Cast-iron Pump Housing (Depending on Model)• Carbon-fibre-reinforced Composite Rotor Can• Stainless-steel Bearing Plate And Rotor Cladding• Aluminium Alloy Stator Housing• Air-cooled Power Electronicsthe Magna3 is a Single-phase Pump.Characteristic Features• Autoadapt.• Flowadapt And Flowlimit (More Than a Pump Function as it Reduces The Need For Pump Throttling Valves).• Proportional-pressure Control.• Constant-pressure Control.• Constant-temperature Control.• Constant-curve Duty.• Max. or Min. Curve Duty.• Automatic Night Setback.• No External Motor Protection Required.• Insulating Shells Supplied With Single-head Pumps For Heating Systems.• Large Temperature Range Where The Liquid Temperature And The Ambient Temperature Are Independent of Each Other.Communicationthe Magna3 Enables Communication Via The Following:• Wireless Grundfos GO Remot

EUR 1088.61

1

Grundfos Magna3 50-120 f 280 1x230v Pn6/10 - Pumpen - 97924284

Magna3 50-120 Fmagna3 - More Than a Pumpwith Its Unrivalled Efficiency, All-encompassing Range And Built-in Communication Capabilities Plus Functionalities Replacing System Components, The Magna3 is Ideal For Engineers And Specifiers Looking to Create High-performance Systems For Buildings. This Pump in The Grundfos Master Class Will Fit Both Heating And Cooling Applications Perfectly, Making it The Obvious Choice For Almost Any Building Project - Old or New.The Magna3 is of The Canned-rotor Type, i.e. Pump And Motor Form an Integral Unit Without Shaft Seal And With Only Two Gaskets For Sealing. The Bearings Are Lubricated by The Pumped Liquid.The Innovative Clamp With Only One Screw Enables Easy Repositioning of The Pump Head. The Magna3 is a Pump With no Maintenance Requirements And With Extremely Low Life Cycle Cost.The Pump is Characterised by The Following:• Controller Integrated in The Control Box• Control Panel With Tft Display on The Control Box• Control Box Prepared For Optional Cim Modules• Built-in Differential-pressure And Temperature Sensor• Cast-iron Pump Housing (Depending on Model)• Carbon-fibre-reinforced Composite Rotor Can• Stainless-steel Bearing Plate And Rotor Cladding• Aluminium Alloy Stator Housing• Air-cooled Power Electronicsthe Magna3 is a Single-phase Pump.Characteristic Features• Autoadapt.• Flowadapt And Flowlimit (More Than a Pump Function as it Reduces The Need For Pump Throttling Valves).• Proportional-pressure Control.• Constant-pressure Control.• Constant-temperature Control.• Constant-curve Duty.• Max. or Min. Curve Duty.• Automatic Night Setback.• No External Motor Protection Required.• Insulating Shells Supplied With Single-head Pumps For Heating Systems.• Large Temperature Range Where The Liquid Temperature And The Ambient Temperature Are Independent of Each Other.Communicationthe Magna3 Enables Communication Via The Following:• Wireless Grundfos GO Remot

EUR 3227.99

1

Grundfos Magna3 25-40n Cirkulating Pump 180 mm - Pumpen - 97924336

Magna3 40-100 Fmagna3 - More Than a Pumpwith Its Unrivalled Efficiency, All-encompassing Range And Built-in Communication Capabilities Plus Functionalities Replacing System Components, The Magna3 is Ideal For Engineers And Specifiers Looking to Create High-performance Systems For Buildings. This Pump in The Grundfos Master Class Will Fit Both Heating And Cooling Applications Perfectly, Making it The Obvious Choice For Almost Any Building Project - Old or New.The Magna3 is of The Canned-rotor Type, i.e. Pump And Motor Form an Integral Unit Without Shaft Seal And With Only Two Gaskets For Sealing. The Bearings Are Lubricated by The Pumped Liquid.The Innovative Clamp With Only One Screw Enables Easy Repositioning of The Pump Head. The Magna3 is a Pump With no Maintenance Requirements And With Extremely Low Life Cycle Cost.The Pump is Characterised by The Following:• Controller Integrated in The Control Box• Control Panel With Tft Display on The Control Box• Control Box Prepared For Optional Cim Modules• Built-in Differential-pressure And Temperature Sensor• Cast-iron Pump Housing (Depending on Model)• Carbon-fibre-reinforced Composite Rotor Can• Stainless-steel Bearing Plate And Rotor Cladding• Aluminium Alloy Stator Housing• Air-cooled Power Electronicsthe Magna3 is a Single-phase Pump.Characteristic Features• Autoadapt.• Flowadapt And Flowlimit (More Than a Pump Function as it Reduces The Need For Pump Throttling Valves).• Proportional-pressure Control.• Constant-pressure Control.• Constant-temperature Control.• Constant-curve Duty.• Max. or Min. Curve Duty.• Automatic Night Setback.• No External Motor Protection Required.• Insulating Shells Supplied With Single-head Pumps For Heating Systems.• Large Temperature Range Where The Liquid Temperature And The Ambient Temperature Are Independent of Each Other.Communicationthe Magna3 Enables Communication Via The Following:• Wireless Grundfos GO Remot

EUR 986.53

1

Grundfos Magna3 25-60 Cirkulating Pump 180 mm - Pumpen - 97924245

Magna3 40-100 Fmagna3 - More Than a Pumpwith Its Unrivalled Efficiency, All-encompassing Range And Built-in Communication Capabilities Plus Functionalities Replacing System Components, The Magna3 is Ideal For Engineers And Specifiers Looking to Create High-performance Systems For Buildings. This Pump in The Grundfos Master Class Will Fit Both Heating And Cooling Applications Perfectly, Making it The Obvious Choice For Almost Any Building Project - Old or New.The Magna3 is of The Canned-rotor Type, i.e. Pump And Motor Form an Integral Unit Without Shaft Seal And With Only Two Gaskets For Sealing. The Bearings Are Lubricated by The Pumped Liquid.The Innovative Clamp With Only One Screw Enables Easy Repositioning of The Pump Head. The Magna3 is a Pump With no Maintenance Requirements And With Extremely Low Life Cycle Cost.The Pump is Characterised by The Following:• Controller Integrated in The Control Box• Control Panel With Tft Display on The Control Box• Control Box Prepared For Optional Cim Modules• Built-in Differential-pressure And Temperature Sensor• Cast-iron Pump Housing (Depending on Model)• Carbon-fibre-reinforced Composite Rotor Can• Stainless-steel Bearing Plate And Rotor Cladding• Aluminium Alloy Stator Housing• Air-cooled Power Electronicsthe Magna3 is a Single-phase Pump.Characteristic Features• Autoadapt.• Flowadapt And Flowlimit (More Than a Pump Function as it Reduces The Need For Pump Throttling Valves).• Proportional-pressure Control.• Constant-pressure Control.• Constant-temperature Control.• Constant-curve Duty.• Max. or Min. Curve Duty.• Automatic Night Setback.• No External Motor Protection Required.• Insulating Shells Supplied With Single-head Pumps For Heating Systems.• Large Temperature Range Where The Liquid Temperature And The Ambient Temperature Are Independent of Each Other.Communicationthe Magna3 Enables Communication Via The Following:• Wireless Grundfos GO Remot

EUR 756.41

1

Grundfos Sololift2 C-3 - Pumpen - 97775317

Sololift2 C-3sololift2 C-3 is a Small, Compact Automatic Lifting Station Suitable For Pumping of Greywater (W/o Faeces) Off Places in Private Dwellings Where Wastewater Cannot be Led Directly to The Sewer by Means of a Natural Downward Slope.Sololift2 C-3 is Typically Used For:• Cabinet Showers, Washbasins, Bath Tubs, Washing Machines (Max. 90°C) And Dishwashers in Basements Below Sewer Level or in Connection With The Renovation or Modernisation of Existing Buildings, Where The Location May be Remote From The Main Soil Pipe so That a Natural Slope Cannot be Established.Sololift2 C-3 is Suitable For Installation Under a Washbasin or Particularly For Confined Space Conditions in Prewall Constructions And Built-in Cabinets. Extremely Low Switching Levels For Lowest Construction Heights, Advantageously in Case of Connection of a Shower Receptor.The Compact Lifting Station is Equipped With- Cable With or Without Plug (See Technical Data)- Horizontal or Vertical Faste

EUR 790.36

1

Grundfos Magna3 40-80 f 220 1x230v Pn6/10 - Pumpen - 97924268

Magna3 40-80 Fmagna3 - Mehr Als Eine Pumpe. Mit Seiner Unübertroffenen Effizienz, Seinem Umfassenden Angebot Und Seinen Integrierten Kommunikationsmöglichkeiten Sowie Funktionen Zur Ersetzung Von Systemkomponenten Ist Die Magna3 Ideal Für Ingenieure Und Planer, Die Hochleistungssysteme Für Gebäude Schaffen Möchten. Diese Pumpe Aus Der Grundfos Master Class Passt Perfekt zu Heizungs- Und Kühlanwendungen Und Ist Somit Die Offensichtliche Wahl Für Fast Jedes Bauvorhaben - Alt Oder Neu. Die Magna3 Ist Vom Typ Mit Eingeschlossenem Rotor, d.h. Pumpe Und Motor Bilden Eine Integrale Einheit Ohne Wellendichtung Und Mit Nur Zwei Dichtungen Zum Abdichten. Die Lager Werden Durch Das Gepumpte Flüssigkeitsmittel Geschmiert.Die Innovative Klammer Mit Nur Einer Schraube Ermöglicht Ein Einfaches Umpositionieren Des Pumpenkopfs. Die Magna3 Ist Eine Pumpe Ohne Wartungsanforderungen Und Extrem Niedrigen Lebenszykluskosten.Die Pumpe Zeichnet Sich Durch Folgendes Aus:• Regler im Steuerkasten Integriert• Bedienfeld Mit Tft-anzeige am Steuerkasten• Steuerbox Vorbereitet Auf Optionale Cim-module• Eingebauter Differenzdruck-und Temperatursensor• Pumpengehäuse Aus Gusseisen (je Nach Modell) • Kohlefaser-verstärkte Verbundrotorwanne • Edelstahl-lagerplatte And Rotorklappen • Gehäuse Aus Aluminiumlegierung • Luftgekühlte Leistungselektronikdie Magna3 Ist Eine Einphasenpumpe.Merkmale• Autoadapt.• Flowadapt Und Flowlimit (Mehr Als Eine Pumpenfunktion, da es Den Bedarf an Pumpendrosselventilen Reduziert).• Proportionaldruckregelung.• Konstantdruckregelung.• Konstanttemperaturregelung.• Konstanter Kurvenbetrieb. • Max. Oder Min. Kurvenpflicht.• Automatische Nachtabsenkung. • Kein Externer Motorschutz Erforderlich. • Isolierschalen Für Einzelkopfpumpen Für Heizsysteme Geliefert .• Großer Temperaturbereich, in Dem Die Flüssigkeitstemperatur Und Die Umgebungstemperatur Unabhängig Voneinander Sind.Kommunikationdie Magna3 Ermöglicht Die Kommunikation Über Folgende:• Drahtlose Grundfos GO Remote

EUR 1989.14

1

Marke

Farbe

Händler

Preis (EUR)